TS4909

超低功耗立體聲耳機(jī)放大器，具有無電容輸出; ? No output coupling capacitors necessary \n? Pop-and-click noise reduction circuitry \n? Operating from VCC = 2.2 V to 5.5 V \n? Standby mode active low \n? Output power: \n ?158 mW at 5 V, into 16 Ω with 1% THD+N max (1 kHz) \n ?52 mW at 3.0 V into 16 Ω with 1% THD+N max (1 kHz) \n? Ultra-low current consumption: 2.0 mA typ. at 3 V? Ultra-low standby consumption: 10 nA typ. \n? High signal-to-noise ratio: 105 dB typ. at 5 V \n? High crosstalk immunity: 110 dB (F = 1 kHz) for single-ended outputs \n? PSRR: 72 dB (F = 1 kHz), inputs grounded, for phantom ground outputs \n? Low tWU: 50 ms in PG mode, 100 ms in SE mode \n? Available in lead-free DFN10 3 x 3 mm;

The TS4909 is a stereo audio amplifier designed to drive headphones in portable applications. The integrated phantom ground is a circuit topology that eliminates the heavy output coupling capacitors. This is of primary importance in portable applications where space constraints are very high. A single-ended configuration is also available, offering even lower power consumption because the phantom ground can be switched off. Pop-and-click noise during switch-on and switch-off phases is eliminated by integrated circuitry.\n\n Specially designed for applications requiring low power supplies, the TS4909 is capable of delivering 31 mW of continuous average power into a 32 Ω load with less than 1% THD+N from a 3 V power supply. Featuring an active low standby mode, the TS4909 reduces the supply current to only 10 nA (typ.). The TS4909 is unity gain stable and can be configured by external gain-setting resistors.\n\n

TS4909

Dual mode low power 150mW stereo headphone amplifier with capacitor-less and single-ended outputs

Description TheTS4909isastereoaudioamplifierdesignedtodriveheadphonesinportableapplications. Features ■Nooutputcouplingcapacitorsnecessary ■Pop-and-clicknoisereductioncircuitry ■OperatingfromVCC=2.2Vto5.5V ■Standbymodeactivelow ■Outputpower: –158mW@

TS4909IQT

Dual mode low power 150mW stereo headphone amplifier with capacitor-less and single-ended outputs

Description TheTS4909isastereoaudioamplifierdesignedtodriveheadphonesinportableapplications. Features ■Nooutputcouplingcapacitorsnecessary ■Pop-and-clicknoisereductioncircuitry ■OperatingfromVCC=2.2Vto5.5V ■Standbymodeactivelow ■Outputpower: –158mW@

4909

AdjustableRFInductors

4909-S

AdjustableRFInductors

BU4909

LowVoltageStandardCMOSVoltageDetectorICs

BU4909

LowVoltageStandardCMOSVoltageDetectorICsUltra-lowcurrentconsumption

BU4909

LowVoltageDetectorIC

BU4909

LowVoltageStandardCMOSVoltageDetectorICs

BU4909

LowVoltageStandardCMOSVoltageDetectorICs