首頁>V62/22613-02XE>規格書詳情
V62/22613-02XE中文資料德州儀器數據手冊PDF規格書
| 廠商型號 |
V62/22613-02XE |
| 功能描述 | THVD24xxV-EP Enhanced 3V to 5.5V RS-485 Transceivers With 1.8V VIO Capability |
| 絲印標識 | |
| 封裝外殼 | VSON |
| 文件大小 |
1.91582 Mbytes |
| 頁面數量 |
37 頁 |
| 生產廠商 | Texas Instruments |
| 企業簡稱 |
TI1【德州儀器】 |
| 中文名稱 | 美國德州儀器公司官網 |
| 原廠標識 |  |
| 數據手冊 | |
| 更新時間 | 2025-6-27 17:18:00 |
| 人工找貨 | V62/22613-02XE價格和庫存，歡迎聯系客服免費人工找貨 |
V62/22613-02XE規格書詳情
1 Features
? Meets or exceeds the requirements of the TIA/
EIA-485A and TIA/EIA-422B standards
? Enhanced Product
– Military temperature range (-55°C to 125°C)
– One wafer fabrication site and one assembly
and test site
– Gold bond wire, NiPdAu lead finish
– Wafer lot traceability
– Extended product life cycle
? 3V to 5.5V supply voltage
? Differential output exceeds 2.1V for PROFIBUS
compatibility with 5V supply
? 1.65V to 5.5V Supply for data and enable signals
? SLR Pin Selectable Data Rates:
– THVD2410V-EP : 250kbps and 1Mbps
– THVD2450V-EP, THVD2452V-EP: 20Mbps and
50Mbps
? Bus I/O protection
– ±70V DC bus fault
– ±16kV HBM ESD
– THVD2410V-EP, THVD2450V-EP
? ±15kV IEC 61000-4-2 contact and air-gap
discharge
– THVD2452V-EP
? ±8kV IEC 61000-4-2 contact and air-gap
discharge
– ±4kV IEC 61000-4-4 fast transient burst
? Half-duplex and full-duplex devices available in
two speed grades
? Symmetric common mode voltage range: ±12V
? Enhanced receiver hysteresis for noise immunity
? Low power consumption
– Low shutdown supply current: < 1μA
– Current during operation: < 5.3mA
? Glitch-free power-up/down for hot plug-in capability
? Open, short, and idle bus failsafe
? Thermal shutdown
? 1/8 unit load (up to 256 bus nodes)
? Small mm x 3mm VSON package (half-duplex) to
save board space, or 14-D (full-duplex) for drop-in
compatibility
2 Applications
? Avionics
? Smart munitions
? Sensors, imaging and radar
? Ruggedized communication
3 Description
THVD24xxV-EP are ±70V fault-protected, half and
full-duplex RS-422/RS-485 transceivers using a 1.65V
to 5.5V logic supply for data and enable logic signals,
and a 3V to 5.5V bus side supply. These devices have
slew rate select feature that enables them to be used
at two maximum speeds based on the SLR pin setting
These devices feature integrated IEC ESD protection,
eliminating the need for external system-level
protection components. The ±12V input commonmode
range makes reliable data communication over
longer cable run lengths and/or in the presence
of large ground loop voltages. Enhanced 250mV
receiver hysteresis provides high noise rejection. In
addition, the receiver fail-safe feature makes sure of
a logic high when the inputs are open or shorted
together.
THVD24xxV-EP half-duplex devices are available
in small VSON package for space-constrained
applications. The devices are available in standard
14-SOIC package.
