TRS3232E集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

TRS3232E屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的TRS3232E驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1FEATURES

· Qualified for Automotive Applications

· ESD Protection for RS-232 Bus Pins

– ±15-kV Human Body Model (HBM)

– ±8 kV (IEC61000-4-2, Contact Discharge)

– ±15 kV (IEC61000-4-2, Air-Gap Discharge)

· Meets or Exceeds the Requirements of

TIA/EIA-232-F and ITU v.28 Standards

· Operates With 3-V to 5.5-V VCC Supply

· Operates up to 250 kbit/s

· Two Drivers and Two Receivers

· Low Supply Current: 300 mA (Typ)

· External Capacitors: 4 × 0.1 mF

· Accepts 5-V Logic Input With 3.3-V Supply

· Pin Compatible to Alternative High-Speed

Device (1 Mbit/s): TRSF3232E

DESCRIPTION

The TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with

±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the

requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication

controller and the serial-port connector. The charge pump and four small external capacitors allow operation from

a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of

30-V/ms driver output slew rate.