TPS62902-Q1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

– Level 2 device HBM ESD classification

– Level C4B CDM ESD classification

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Extended TJ range: up to 165°C

? High efficiency DCS-Control topology

– RDS(ON): 62-mΩ high side, 22-mΩ low side

– Seamless PWM/PFM transition

– Internal compensation

? 4-μA low IQ (typical)

? Up to 3-A continuous output current

? ±1.5 output voltage accuracy across temp

? Configurable output voltage options:

– 0.6-V to 5.5-V VFB external divider

– VSET internal divider

? 16 options between 0.4 V and 5.5 V

? Flexibility through the MODE/S-CONF pin

– 2.5-MHz or 1.0-MHz switching frequency

– Forced PWM or Auto PFM (power save mode)

with dynamic mode change option

– Output discharge on and off

? No external bootstrap capacitor required

? Overcurrent and overtemperature protection

? 100 duty cycle mode

? Precise enable input

? Adjustable soft start and tracking

? Power-good output

? Optimized pinout for single-layer routing

? Wettable 2.2-mm × 2.0-mm VQFN package with

0.5-mm pitch

? Create a custom design with the TPS62993-Q1

using the WEBENCH? Power Designer

2 Applications

? ADAS

? Body electronics and lighting

? Infotainment and cluster

? Hybrid, electric, and powertrain systems

3 Description

The TPS62993-Q1 is a highly efficient, small, and

flexible synchronous step-down DC-DC converter that

is easy to use. A selectable switching frequency of 2.5

MHz or 1.0 MHz allows the use of small inductors and

provides fast transient response. The device supports

high VOUT accuracy of ± 1.5 across the entire

operasting temperature range and enhanced load

transient performance with the DCS-Control topology.

The wide 3-V to 10-V input voltage range supports a

variety of nominal inputs, like 9-V supply rails, singlecell

or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62993-Q1 can automatically enter power

save mode (if auto PFM or PWM is selected) at

light loads to maintain high efficiency. Additionally,

to provide high efficiency at very small loads, the

device has a low typical quiescent current of 4 μA.

AEE, if enabled, provides high efficiency across VIN,

VOUT, and load current. The device includes a MODE/

Smart-CONF input to set the internal and external

divider, switching frequency, output voltage discharge,

and automatic power save mode or forced PWM

operation.