TPA311

支持從橋接式負載切換至單端開關模式的 350mW、單聲道 AB 類音頻放大器; ? Fully Specified for 3.3-V and 5-V Operation\n? Wide Power Supply Compatibility 2.5 V - 5.5 V\n? Output Power for RL = 8 \n? 350 mW at VDD = 5 V, BTL\n? 250 mW at VDD = 5 V, SE\n? 250 mW at VDD = 3.3 V, BTL\n? 75 mW at VDD = 3.3 V, SE\n \n? Shutdown Control \n? IDD = 7 μA at 3.3 V\n? IDD = 60 μA at 5 V\n \n? BTL to SE Mode Control\n? Integrated Depop Circuitry\n? Thermal and Short-Circuit Protection\n? Surface Mount Packaging \n? SOIC\n? PowerPADTM MSOP\n \n PowerPAD is a trademark of Texas Instruments Incorporated.;

The TPA311 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA311 can deliver 250-mW of continuous power into a BTL 8- load at less than 1% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation was optimized for narrower band applications such as cellular communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA311 is that it allows the amplifier to switch from BTL to SE on the fly when an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to virtually eliminate speaker noise when exiting shutdown mode and during power cycling. The TPA311 is available in an 8-pin SOIC surface-mount package and the surface-mount PowerPAD MSOP, which reduces board space by 50% and height by 40%.

TPA311

350-mW MONO AUDIO POWER AMPLIFIER

TPA311

350-mW MONO AUDIO POWER AMPLIFIER

TPA3110D2-Q1

具有 SpeakerGuard? 的汽車類 15W、2 通道、8V 至 26V 電源模擬輸入 D 類音頻放大器; ? 符合汽車應用 標準\n? 具有符合 AEC-Q100 標準的下列特性： \n? 器件溫度 1 級：–40°C 至 125°C 的環境工作溫度范圍 \n? 器件人體放電模式 (HBM) 靜電放電 (ESD) 分類等級 H2\n? 器件組件充電模式 (CDM) ESD 分類等級 C2\n \n? 由 16V 電源供電時，每通道 15W 進入 8Ω 負載（在 10% 總諧波失真 (THD)+N 時）\n? 由 13V 電源供電時，每通道 10W 進入 8Ω 負載（在 10% THD+N 時）\n? 由 16V 電源供電時，30W 進入 4Ω 單聲道負載（在 10% THD+N 時）\n? 效率高達 90% 的 D 類操作免除了對散熱片的需要\n? 寬電源電壓范圍可實現在 8V 至 26V 的范圍內運行\(zhòng)n? 無濾波器運行\(zhòng)n? SpeakerGuard?保護電路包括可調節功率限制器和直流保護 \n? 直通式外引腳簡化了電路板布局\n? 具有自動恢復選項的穩健耐用的引腳至引腳短路保護和熱保護\n? 出色的 THD+N 和無爆音性能\n? 4 個可選固定增益設置\n? 差分輸入;

TPA3110D2-Q1 是一款用于驅動橋接式立體聲揚聲器的 15W（每通道）高效、D 類音頻功率放大器。高級電磁干擾 (EMI) 抑制技術能夠在滿足電磁兼容 (EMC) 要求的同時使用戶能夠在輸出端上使用價格低廉的磁珠濾波器。SpeakerGuard 保護電路系統包含一個可調節功率限制器和一個 DC 檢測電路。可調節功率限制器允許用戶設置一個低于芯片電源電壓的虛擬電壓軌，以便限制通過揚聲器的電量。DC 檢測電路可以測量脈寬調制 (PWM) 信號的頻率和振幅，如果輸入電容器受損或者輸入端存在短路，它就會關閉輸出級。\n\nTPA3110D2-Q1 可以驅動低至 4Ω 的立體聲揚聲器。該器件具有 90% 的高效率，播放音樂時無需外部散熱器。\n\n輸出受到完全的保護以防止到 GND，VCC 和輸出到輸出的短接。短路保護和熱保護均含有自動恢復功能。

TPA3116

15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance

1Features 1?SupportsMultipleOutputConfigurations –2×50WIntoa4-ΩBTLLoadat21V (TPA3116D2) –2×30WIntoa8-ΩBTLLoadat24V (TPA3118D2) –2×15WIntoa8-ΩBTLLoadat15V (TPA3130D2) ?WideVoltageRange:4.5Vto26V ?EfficientClass-DOperation –>90%Powe

TPA3116D2

15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance

1Features 1?SupportsMultipleOutputConfigurations –2×50WIntoa4-ΩBTLLoadat21V (TPA3116D2) –2×30WIntoa8-ΩBTLLoadat24V (TPA3118D2) –2×15WIntoa8-ΩBTLLoadat15V (TPA3130D2) ?WideVoltageRange:4.5Vto26V ?EfficientClass-DOperation –>90PowerEfficiencyC

TPA3116D2_V01

15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance

1Features 1?SupportsMultipleOutputConfigurations –2×50WIntoa4-ΩBTLLoadat21V (TPA3116D2) –2×30WIntoa8-ΩBTLLoadat24V (TPA3118D2) –2×15WIntoa8-ΩBTLLoadat15V (TPA3130D2) ?WideVoltageRange:4.5Vto26V ?EfficientClass-DOperation –>90PowerEff

TPA3116D2DAD

絲印：TPA3116D2；Package：HTSSOP；15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance

1Features 1?SupportsMultipleOutputConfigurations –2×50WIntoa4-ΩBTLLoadat21V (TPA3116D2) –2×30WIntoa8-ΩBTLLoadat24V (TPA3118D2) –2×15WIntoa8-ΩBTLLoadat15V (TPA3130D2) ?WideVoltageRange:4.5Vto26V ?EfficientClass-DOperation –>90PowerEfficiencyC

TPA3116D2DADR

絲?。?a target="_blank" title="Marking" href="/tpa3116d2/marking.html">TPA3116D2；Package：HTSSOP；15-W, 30-W, 50-W Filter-Free Class-D Stereo Amplifier Family With AM Avoidance

1Features 1?SupportsMultipleOutputConfigurations –2×50WIntoa4-ΩBTLLoadat21V (TPA3116D2) –2×30WIntoa8-ΩBTLLoadat24V (TPA3118D2) –2×15WIntoa8-ΩBTLLoadat15V (TPA3130D2) ?WideVoltageRange:4.5Vto26V ?EfficientClass-DOperation –>90PowerEff

TPA3116D2-Q1

100-W and 50-W Class-D Stereo Automotive Amplifiers

TPA311xD2-Q1器件是用于驅動揚聲器的汽車類高效立體聲數字放大器功率級，單聲道模式下的驅動功率高達100W/2?。TPA3118D2-Q1甚至可以在不使用外部散熱器的情況下在雙層PCB上提供2×30W/8?的功率。如果需要更高的功率，可以選用TPA3116D2-Q1，這款器件在其頂層散熱焊盤上連接一個小型散熱器后可提供2×50W/4?的功率。TPA311xD2-Q1高級振蕩器和PLL電路采用多開關頻率選項來抑制AM干擾；搭配使用主從模式選項時，還可使多個器件實現同步。TPA311xD2-Q1器件針對短路、過熱、過壓、欠壓和直流等故障提供了全