TMUX13

TMUX13xx 5-V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Multiplexers with Injection Current Control

TMUX1308A

TMUX13xxA-Q1 Automotive 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?AEC-Q100qualifiedforautomotiveapplications –DeviceTemperatureGrade1:–40°Cto125°C ambientoperatingtemperature ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?Fastsettlingtimes ?LowON-capaci

TMUX1308A

TMUX13xxA 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?LowON-capacitance ?Bidirectionalsignalpath ?Optimizedforhigh-impedanceloads ?Rail-to-railoperation ?1.8Vlogiccompatible ?Fail-safelogic ?Brea

TMUX1308A

5V, bidirectional 8:1, 1-channel multiplexer with injection current control & 1.8V logic; Injection current control\n \nBack-powering protection \n \nNo ESD diode path to VDD\n \n\n \nWide supply range: 1.62V to 5.5V\n \nLow ON-capacitance\n \nBidirectional signal path\n \nOptimized for high-impedance loads\n \nRail-to-rail operation\n \n1.8V logic compatible\n \nFail-safe logic\n \nBreak-before-make switching\n \nShort-to-battery protection for ON and OFF channels\n \nFunctional safety-capable \n \nDocumentation available to aid functional safety system design\n \n\n \nTMUX1308A – pin compatible with: \n \nIndustry standard 4051, 4851 and 1308 multiplexers\n \n\n \nTMUX1309A – pin compatible with: \n \nIndustry standard 4052, 4852 and 1309 multiplexers;

The TMUX1308A and TMUX1309A are general purpose complementary metal-oxide semiconductor (CMOS) multiplexers (MUX). The TMUX1308A is an 8:1, 1-channel (single-ended) mux, while the TMUX1309A is a 4:1, 2-channel (differential) mux. The devices support bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from GND to VDD.\n\nThe TMUX13xxA devices have an internal injection current control feature, which eliminates the need for external diode and resistor networks typically used to protect the switch and keep the input signals within the supply voltage. The internal injection current control circuitry allows signals on disabled or enabled signal paths to exceed the supply voltage. Disabled channels with voltages above VDD are prevented from affecting the signal of the enabled signal path. Additionally, the TMUX13xxA devices do not have an internal diode path to the supply pin, which eliminates the risk of damaging components connected to the supply pin or providing unintended power to the supply rail. \n\nAll logic inputs have 1.8V logic compatible thresholds, allowing for both TTL and CMOS logic compatibility when operating with a valid supply voltage. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.

TMUX1308APWR

Marking：1308A；Package：TSSOP；TMUX13xxA 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?LowON-capacitance ?Bidirectionalsignalpath ?Optimizedforhigh-impedanceloads ?Rail-to-railoperation ?1.8Vlogiccompatible ?Fail-safelogic ?Brea

TMUX1308A-Q1

TMUX13xxA 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?LowON-capacitance ?Bidirectionalsignalpath ?Optimizedforhigh-impedanceloads ?Rail-to-railoperation ?1.8Vlogiccompatible ?Fail-safelogic ?Brea

TMUX1308A-Q1

TMUX13xxA-Q1 Automotive 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?AEC-Q100qualifiedforautomotiveapplications –DeviceTemperatureGrade1:–40°Cto125°C ambientoperatingtemperature ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?Fastsettlingtimes ?LowON-capaci

TMUX1308AQPWRQ1

Marking：1308AQ；Package：TSSOP；TMUX13xxA-Q1 Automotive 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?AEC-Q100qualifiedforautomotiveapplications –DeviceTemperatureGrade1:–40°Cto125°C ambientoperatingtemperature ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?Fastsettlingtimes ?LowON-capaci

TMUX1308-Q1

具有注入電流控制和 1.8V 邏輯電平的汽車類 5V、8:1、單通道多路復用器; ? 符合面向汽車應用的 AEC-Q100 標準 \n? 器件溫度等級 1：–40°C 至 125°C 環境工作溫度\n \n? 注入電流控制\n? 反向供電保護 \n? 無到 VDD 的 ESD 二極管路徑\n \n? 寬電源電壓范圍：1.62V 至 5.5V\n? 低電容\n? 雙向信號路徑\n? 軌至軌運行\(zhòng)n? 兼容 1.8V 邏輯電平\n? 失效防護邏輯\n? 先斷后合開關\n? 提供功能安全 \n? 可幫助進行功能安全系統設計的文檔 \n \n? TMUX1308-Q1 - 與以下器件引腳兼容： \n? 業界通用的 4051 和 4851 多路復用器\n \n? TMUX1309-Q1 - 與以下器件引腳兼容： \n? 業界通用的 4052 和 4852 多路復用器;

TMUX1308 和 TMUX1309 為通用互補金屬氧化物半導體 (CMOS) 多路復用器 (MUX)。TMUX1308-Q1 是 8:1 單通道（單端）多路復用器，而 TMUX1309-Q1 是 4:1 雙通道（差分）多路復用器。這些器件可在源極 (Sx) 和漏極 (Dx) 引腳上支持從 GND 到 VDD 范圍的雙向模擬和數字信號。\n\nTMUX13xx-Q1 器件具有內部注入電流控制功能，從而無需外部二極管和電阻器網絡（通常用于保護開關并使輸入信號保持在電源電壓范圍之內）。內部注入電流控制電路允許禁用信號路徑上的信號超過電源電壓，而不會影響啟用信號路徑的信號。此外，TMUX13xx-Q1 器件沒有到電源引腳的內部二極管路徑，從而消除了損壞連接到電源引腳的元件或?yàn)殡娫窜壧峁┮馔怆娫吹娘L(fēng)險。\n\n所有邏輯輸入均具有兼容 1.8V 邏輯的閾值，在有效電源電壓下運行時，這些閾值可確保 TTL 和 CMOS 邏輯兼容性。失效防護邏輯電路允許先在控制引腳上施加電壓，然后在電源引腳上施加電壓，從而保護器件免受潛在的損害。

TMUX1309A

TMUX13xxA 5V, Bidirectional 8:1, 1-Channel and 4:1, 2-Channel Current Injection Controlled Multiplexers Optimized for High-Impedance Loads

1Features ?Injectioncurrentcontrol ?Back-poweringprotection –NoESDdiodepathtoVDD ?Widesupplyrange:1.62Vto5.5V ?LowON-capacitance ?Bidirectionalsignalpath ?Optimizedforhigh-impedanceloads ?Rail-to-railoperation ?1.8Vlogiccompatible ?Fail-safelogic ?Brea