TLIN2024ARGYRQ1中文資料德州儀器數(shù)據(jù)手冊(cè)PDF規(guī)格書

1 Features

? AEC-Q100 (Grade1) Qualified for automotive

applications

? Compliant to LIN2.0, LIN2.1, LIN2.2, LIN2.2A and

ISO/DIS 17987–4 electrical physical layer (EPL)

specification

? Compliant to SAE J2602-1 LIN network for vehicle

applications

? Functional Safety-Capable

– Documentation available to aid in functional

safety system design

? Supports 12-V and 24-V battery applications

? LIN transmit data rate up to 20 kbps

? LIN receive data rate up to 100 kbps

? Wide operational supply voltage range: 4 V to 48 V

? Sleep mode: ultra-low current consumption allows

wake-up event from:

– LIN bus

– Local wake-up through EN

? Integrated 45 kΩ LIN pull-up resistor

? Power up and power down glitch-free operation on

LIN bus and RXD output

? Protection features:

– ±60 V LIN bus fault tolerant

– Under voltage protection on VSUP

– TXD Dominant time out protection (DTO)

– Thermal shutdown protection

– Unpowered node or ground disconnection

failsafe at system level.

? 3.5 mm × 5.5 mm VQFN package with improved

automated optical inspection (AOI) capability

2 Applications

? Body electronics and lighting

? Hybrid electric vehicles and power train systems

? Infotainment and cluster

? Appliances

3 Description

The TLIN2024A-Q1 device is a Quad Local

Interconnect Network (LIN) physical layer transceiver,

which integrates wake-up and protection features,

compliant to LIN2.0, LIN2.1, LIN2.2, LIN2.2A and

ISO/DIS 17987–4 standards. LIN is a single wire

bidirectional bus typically used for low speed invehicle

networks using data rates up to 20 kbps.

The TLIN2024A-Q1 is designed to support 12-V and

24-V applications with wider operating voltage and

additional bus-fault protection. The device has two

separate dual LIN transceiver blocks. The VSUP1/2

control separate dual transceiver blocks.

The TLIN2024A-Q1 receiver supports data rates up to

100 kbps for faster in-line programming. The device

converts the LIN protocol data stream on the TXD

input into a LIN bus signal using a current-limited

wave-shaping driver which reduces electromagnetic

emissions (EME). The receiver converts the data

stream to logic level signals that are sent to the

microprocessor through the open-drain RXD pin.

Ultra-low current consumption is possible using the

sleep mode which allows wake-up via LIN bus or EN

pin.