TCAN1044AEV-Q1

Automotive grade-0 enhanced CAN FD transceiver with standby; ? AEC-Q100 (Grade 0) Qualified for automotive applications\n? Meets the requirements of ISO 11898-2:2016 physical layer standard\n? Functional Safety-Capable \n? Documentation available to aid in functional safety system design \n \n? Support of classical CAN and optimized CAN FD performance at 2, 5, and 8 Mbps \n? Short and symmetrical propagation delays for enhanced timing margin\n \n? I/O voltage range supports 1.7 V to 5.5 V \n? Support for 12-V and 24-V battery applications\n? Receiver common mode input voltage: ±12 V\n? Protection features: \n? Bus fault protection: ±58 V\n? Undervoltage protection\n? TXD-dominant time-out (DTO) \n? Data rates down to 9.2 kbps\n \n? Thermal-shutdown protection (TSD)\n \n? Operating modes: \n? Normal mode\n? Low power standby mode supporting remote wake-up request\n \n? Optimized behavior when unpowered \n? Bus and logic pins are high impedance (no load to operating bus or application)\n? Hot-plug capable: power up/down glitch-free operation on bus and RXD output\n \n? 8-Pin SOIC and small footprint SOT-23 package;

The TCAN1044AEV-Q1 is a high-speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.\n\nThe transceiver has a certified electromagnetic compatibility (EMC) operation making it a suitable choice for classical CAN and CAN FD networks up to 5 megabits per second (Mbps). Up to 8 Mbps operation in simpler networks is possible with these devices. The device includes internal logic level translation via the VIO pin to allow for interfacing the transceiver I/O?s directly to 1.8-V, 2.5-V, 3.3-V, or 5-V logic levels. The transceiver supports a low-power standby mode and wake over CAN which is compliant to the ISO 11898-2:2016 defined wake-up pattern (WUP). \n\nThe transceiver also includes thermal-shutdown (TSD), TXD-dominant time-out (DTO), supply undervoltage detection, and ±58-V bus fault protection. The device has defined fail-safe behavior in supply undervoltage or floating pin scenarios.

TCAN1044AEV-Q1

TCAN1044AEV-Q1 Grade 0 Fault-Protected CAN FD Transceiver with 1.8-V I/O Support

1Features ?AEC-Q100(Grade0)Qualifiedforautomotive applications ?MeetstherequirementsofISO11898-2:2016 physicallayerstandard ?FunctionalSafety-Capable –Documentationavailabletoaidinfunctional safetysystemdesign ?SupportofclassicalCANandoptimizedCANFD perfor

TCAN1044AEV-Q1

TCAN1044AEV-Q1 Grade 0 Fault-Protected CAN FD Transceiver with 1.8-V I/O Support

TCAN1044AEV-Q1_V01

TCAN1044AEV-Q1 Grade 0 Fault-Protected CAN FD Transceiver with 1.8-V I/O Support

1Features ?AEC-Q100(Grade0)Qualifiedforautomotive applications ?MeetstherequirementsofISO11898-2:2016 physicallayerstandard ?FunctionalSafety-Capable –Documentationavailabletoaidinfunctional safetysystemdesign ?SupportofclassicalCANandoptimizedCANFD perfor

TCAN1051GDRBTQ1

TI/德州儀器
VDFN-8

TI/德州儀器