TAS5615

具有集成反饋的模擬輸入 160W 立體聲（總計 300W）D 類放大器; ? Active Enabled Integrated Feedback Provides: (PurePath? HD Technology) \n? Signal Bandwidth up to 80 kHz for High-Frequency Content From High-Definition Sources\n? Ultralow 0.03% THD at 1 W into 8 \n? 0.03% THD Across All Frequencies for Natural Sound at 1 W\n? 80-dB PSRR (BTL, No Input Signal)\n? >100-dB (A weighted) SNR\n? Click- and Pop-Free Start-Up\n? Minimal External Components Compared to Discrete Solutions\n \n? Multiple Configurations Possible on the Same PCB: \n? Mono Parallel Bridge-Tied Load (PBTL)\n? 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer\n? Quad Single-Ended (SE) Outputs\n \n? Total Output Power at 10% THD+N \n? 300 W in Mono PBTL Configuration\n? 160 W per Channel in Stereo BTL\n? 80 W per Channel in Quad Single-Ended\n \n? High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs\n? Two Thermally Enhanced Package Options: \n? PHD (64-Pin QFP)\n? DKD (44-Pin PSOP3)\n \n? Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and Short-Circuit Protection) With Error Reporting\n? EMI Compliant When Used With Recommended System Design\n? APPLICATIONS \n? Mini Combo System\n? AV Receivers\n? DVD Receivers\n? Active Speakers\n \n \n Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels PurePath HD is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.;

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath? HD technology). It has the ability to drive up to 160 W\n\n stereo into 8- speakers from a single 50-V supply.\n\n PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.\n\n Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.\n\n The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.\n\n\n\n The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath? HD technology). It has the ability to drive up to 160 W\n\n stereo into 8- speakers from a single 50-V supply.\n\n PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.\n\n Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.\n\n The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.\n\n\n\n

TAS5615

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615_10

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615DKD

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615DKD

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615DKDR

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615DKDR

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615PHD

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage

TAS5615PHD

160 W STEREO/300W MONO PurePath??HD Analog-Input Power Stage