STUSB03EQR集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

STUSB03EQR屬于集成電路（IC）的驅動器接收器收發器。由意法半導體集團制造生產的STUSB03EQR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Description

The STUSB03E is a single chip transceiver that complies with the physical layer specifications of the Universal Serial Bus (USB) v2.0 standard. It has an integrated 5V to 3.3V regulator which allows direct powering from the VBUS. The transceiver has an integrated voltage detector to detect the presence of the VBUS voltage and features an internal D+ pull-up resistor implemented in accordance with the 27 resistor ECN.

The STUSB03E also supports Sharing mode when VBUS is not present, which allows the D+/D–lines to be shared with other serial protocols.

It supports both full-speed (12Mbps) and low speed (1.5Mbps) operation. It is also designed to operate down to 1.6V so that it is compatible with lower system voltages of most portable systems, which include PDAs, MP3 Player and Cell phones.

General features

■ Compliant to USB V2.0 for full-speed (12Mb/s) and low-speed (1.5Mbps) operation

■ HBM = ±14kV on D+, D– lines; ±5kV on VBUS

■ ESD Compliant to IEC-61000-4.2 (level 3) on D+, D- lines

■ Separate I/O supply with operation down to 1.6V

■ Integrated 3.3V output LDO

■ Very low power consumption to meet USB ‘suspend’ current requirements

■ Small QFN16 lead free package 3x3 mm2

■ No power supply sequencing requirements

■ Software controlled re-enumeration

■ Integrated D+ pull-up resistor for FS operation