STM32L151CC

Reset and supply management

Description Theultra-low-powerSTM32L151xCandSTM32L152xCdevicesincorporatetheconnectivitypoweroftheuniversalserialbus(USB)withthehigh-performanceARM?Cortex?-M332-bitRISCcoreoperatingatafrequencyof32MHz(33.3DMIPS),amemoryprotectionunit(MPU),high-speedembedded

STM32L151CC

超低功耗Arm Cortex-M3 MCU，具有256-KB Flash存儲器、32 MHz CPU、USB和2x運算放大器; ? Ultra-low-power platform \n ?1.65 V to 3.6 V power supply \n ?-40 °C to 105 °C temperature range \n ?0.29μA Standby mode (3 wakeup pins) \n ?1.15 μA Standby mode + RTC \n ?0.44 μA Stop mode (16 wakeup lines) \n ?1.4 μA Stop mode + RTC \n ?8.6 μA Low-power run mode \n ?185 μA/MHz Run mode \n ?10 nA ultra-low I/O leakage \n ?8 μs wakeup time \n? Core: ARM? Cortex?-M3 32-bit CPU \n ?From 32 kHz up to 32 MHz max \n ?1.25 DMIPS/MHz (Dhrystone 2.1) \n ?Memory protection unit \n? Reset and supply management \n ?Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds \n ?Ultra-low-power POR/PDR \n ?Programmable voltage detector (PVD) \n? Clock sources \n ?1 to 24 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?High Speed Internal 16 MHz factory-trimmed RC (+/- 1%) \n ?Internal Low-power 37 kHz RC \n ?Internal multispeed low-power 65 kHz to 4.2 MHz PLL for CPU clock and USB (48 MHz) \n? Pre-programmed bootloader \n ?USB and USART supported \n? Development support \n ?Serial wire debug supported \n ?JTAG and trace supported \n? Up to 83 fast I/Os (70 I/Os 5V tolerant), all mappable on 16 external interrupt vectors \n? Memories \n ?256 Kbytes of Flash memory with ECC \n ?32 Kbytes of RAM \n ?8 Kbytes of true EEPROM with ECC \n ?128-byte backup register? LCD Driver (except STM32L151xC devices) up to 8x40 segments, contrast adjustment, blinking mode, step-up converter \n? Rich analog peripherals (down to 1.8 V) \n ?2x operational amplifiers \n ?12-bit ADC 1Msps up to 25 channels \n ?12-bit DAC 2 channels with output buffers \n ?2x ultra-low-power-comparators(window mode and wake up capability) \n? DMA controller 12x channels \n? 9x peripheral communication interfaces \n ?1x USB 2.0 (internal 48 MHz PLL) \n ?3x USARTs \n ?Up to 8x SPIs (2x I2S, 3x 16 Mbit/s) \n ?2x I2Cs (SMBus/PMBus) \n? 11x timers: 1x 32-bit, 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window) \n? Up to 23 capacitive sensing channels \n? CRC calculation unit, 96-bit unique ID;

The ultra-low-power STM32L151xC and STM32L152xC devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM? Cortex?-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 256 Kbytes and RAM up to 32 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.\n\n The STM32L151xC and STM32L152xC devices offer two operational amplifiers, one 12-bit ADC, two DACs, two ultra-low-power comparators, one general-purpose 32-bit timer, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.\n\n Moreover, the STM32L151xC and STM32L152xC devices contain standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, three USARTs and an USB. The STM32L151xC and STM32L152xC devices offer up to 23 capacitive sensing channels to simply add a touch sensing functionality to any application.\n\n They also include a real-time clock and a set of backup registers that remain powered in Standby mode.\n\n Finally, the integrated LCD controller (except STM32L151xC devices) has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.\n\n The ultra-low-power STM32L151xC and STM32L152xC devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.\n\n

STM32L151CCT6

Reset and supply management

Description Theultra-low-powerSTM32L151xCandSTM32L152xCdevicesincorporatetheconnectivitypoweroftheuniversalserialbus(USB)withthehigh-performanceARM?Cortex?-M332-bitRISCcoreoperatingatafrequencyof32MHz(33.3DMIPS),amemoryprotectionunit(MPU),high-speedembedded

STM32L151CCU6

Reset and supply management

Description Theultra-low-powerSTM32L151xCandSTM32L152xCdevicesincorporatetheconnectivitypoweroftheuniversalserialbus(USB)withthehigh-performanceARM?Cortex?-M332-bitRISCcoreoperatingatafrequencyof32MHz(33.3DMIPS),amemoryprotectionunit(MPU),high-speedembedded

STM32L151CCT6

Ultra-low-power 32-bit MCU ARM?-based Cortex?-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

STM32L151CCU6

Ultra-low-power 32-bit MCU ARM?-based Cortex?-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC