STM32F373C8數據手冊中文資料規格書

描述 Description

The STM32F373xx family is based on the high-performance ARM? Cortex?-M4 32-bit RISC core operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an Embedded Trace Macrocell? (ETM). The family incorporates high-speed embedded memories (up to 256 Kbyte of Flash memory, up to 32 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32F373xx devices offer one fast 12-bit ADC (1 Msps), three 16-bit Sigma delta ADCs, two comparators, two DACs (DAC1 with 2 channels and DAC2 with 1 channel), a low-power RTC, 9 general-purpose 16-bit timers, two general-purpose 32-bit timers, three basic timers.

They also feature standard and advanced communication interfaces: two I2Cs, three SPIs, all with muxed I2Ss, three USARTs, CAN and USB.

The STM32F373xx family operates in the -40 to +85 °C and -40 to +105 °C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F373xx family offers devices in five packages ranging from 48 pins to 100 pins. The set of included peripherals changes with the device chosen.

特性 Features

? Core: ARM?32-bit Cortex?-M4 CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floating-point unit) and MPU (memory protection unit)
? 1.25 DMIPS/MHz (Dhrystone 2.1)
? Memories
?64 to 256 Kbytes of Flash memory
?32 Kbytes of SRAM with HW parity check
? CRC calculation unit
? Reset and power management
?Voltage range: 2.0 to 3.6 V
?Power-on/Power down reset (POR/PDR)
?Programmable voltage detector (PVD)
?Low power modes: Sleep, Stop, Standby
?VBATsupply for RTC and backup registers
? Clock management
?4 to 32 MHz crystal oscillator
?32 kHz oscillator for RTC with calibration
?Internal 8 MHz RC with x16 PLL option
?Internal 40 kHz oscillator
? Up to 84 fast I/Os
?All mappable on external interrupt vectors
?Up to 45 I/Os with 5 V tolerant capability
? 12-channel DMA controller
? One 12-bit, 1.0 μs ADC (up to 16 channels)
?Conversion range: 0 to 3.6 V
?Separate analog supply from 2.4 up to 3.6
? Three 16-bit Sigma Delta ADC
?Separate analog supply from 2.2 to 3.6 V, up to 21 single/ 11 diff channels
? Three 12-bit DAC channels
? Two fast rail-to-rail analog comparators with programmable input and output
? Up to 24 capacitive sensing channels
? 17 timers
?Two 32-bit timers and three 16-bit timers with up to 4 IC/OC/PWM or pulse counters
?Two 16-bit timers with up to 2 IC/OC/PWM or pulse counters
?Four 16-bit timers with up to 1 IC/OC/PWM or pulse counter
?Independent and system watchdog timers
?SysTick timer: 24-bit down counter
?Three 16-bit basic timers to drive the DAC
? Calendar RTC with Alarm and periodic wakeup from Stop/Standby
? Communication interfaces
?CAN interface (2.0B Active)
?Two I2Cs supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP
?Three USARTs supporting synchronous mode, modem control, ISO/IEC 7816, LIN, IrDA, auto baud rate, wakeup feature
?Three SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, muxed I2S
?HDMI-CEC bus interface
?USB 2.0 full speed interface
? Serial wire devices, JTAG, Cortex?-M4 ETM
? 96-bit unique ID