STM32F303VB

ARM Cortex-M4F 32b MCUFPU, up to 256KB Flash48KB SRAM

Description TheSTM32F302xB/STM32F302xCfamilyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcorewithFPUoperatingatafrequencyofupto72MHz,andembeddingafloatingpointunit(FPU),amemoryprotectionunit(MPU)andanembeddedtracemacrocell(ETM).Thefamilyincorpora

STM32F303VB

ARM?-based Cortex?-M4 32b MCUFPU, up to 256KB Flash 48KB SRAM, 4 ADCs, 2 DAC ch., 7 comp, 4 PGA, timers, 2.0-3.6 V

Description TheSTM32F302xx/STM32F303xxfamilyisbasedonthehigh-performanceARM?Cortex?-M4F32-bitRISCcoreoperatingatafrequencyofupto72MHz,andembeddingafloatingpointunit(FPU),amemoryprotectionunit(MPU)andanembeddedtracemacrocell(ETM).Thefamilyincorporateshigh

STM32F303VC

ARM Cortex-M4F 32b MCUFPU, up to 256KB Flash48KB SRAM

Description TheSTM32F302xB/STM32F302xCfamilyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcorewithFPUoperatingatafrequencyofupto72MHz,andembeddingafloatingpointunit(FPU),amemoryprotectionunit(MPU)andanembeddedtracemacrocell(ETM).Thefamilyincorpora

STM32F303VC

ARM?-based Cortex?-M4 32b MCUFPU, up to 256KB Flash 48KB SRAM, 4 ADCs, 2 DAC ch., 7 comp, 4 PGA, timers, 2.0-3.6 V

Description TheSTM32F302xx/STM32F303xxfamilyisbasedonthehigh-performanceARM?Cortex?-M4F32-bitRISCcoreoperatingatafrequencyofupto72MHz,andembeddingafloatingpointunit(FPU),amemoryprotectionunit(MPU)andanembeddedtracemacrocell(ETM).Thefamilyincorporateshigh

STM32F303VC

帶DSP和FPU的主流混合信號(hào)ARM Cortex-M4 MCU，具有256 KB Flash、72 MHz CPU、MPU、CCM、5 Msps 12位ADC、PGA和比較器; ? Core: Arm? Cortex?-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit) \n? Operating conditions: \n ?VDD, VDDA voltage range: 2.0 V to 3.6 V \n? Memories \n ?128 to 256 Kbytes of Flash memory \n ?Up to 40 Kbytes of SRAM, with HW parity check implemented on the first 16 Kbytes. \n ?Routine booster: 8 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM) \n? CRC calculation unit \n? Reset and supply management \n ?Power-on/power-down reset (POR/PDR) \n ?Programmable voltage detector (PVD) \n ?Low-power modes: Sleep, Stop and Standby \n ?VBAT supply for RTC and backup registers \n? Clock management \n ?4 to 32 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?Internal 8 MHz RC with x 16 PLL option \n ?Internal 40 kHz oscillator \n? Up to 87 fast I/Os \n ?All mappable on external interrupt vectors \n ?Several 5 V-tolerant \n? Interconnect matrix \n? 12-channel DMA controller \n? Four ADCs 0.20 μS (up to 39 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential input, separate analog supply from 2 to 3.6 V? Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V \n? Seven fast rail-to-rail analog comparators with analog supply from 2 to 3.6 V \n? Four operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V \n? Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors \n? Up to 13 timers \n ?One 32-bit timer and two 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input \n ?Two 16-bit 6-channel advanced-control timers, with up to 6 PWM channels, deadtime generation and emergency stop \n ?One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation and emergency stop \n ?Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop \n ?Two watchdog timers (independent, window) \n ?SysTick timer: 24-bit downcounter \n ?Two 16-bit basic timers to drive the DAC \n? Calendar RTC with Alarm, periodic wakeup from Stop/Standby \n? Communication interfaces \n ?CAN interface (2.0B Active) \n ?Two I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP \n ?Up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to three SPIs, two with multiplexed half/full duplex I2S interface, 4 to 16 programmable bit frames \n ?USB 2.0 full speed interface \n ?Infrared transmitter \n? Serial wire debug, Cortex?-M4 with FPU ETM, JTAG \n? 96-bit unique ID;

The STM32F303xB/STM32F303xC family is based on the high-performance Arm? Cortex?-M4 32-bit RISC core with FPU operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (up to 256 Kbytes of Flash memory, up to 40 Kbytes of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.\n\n The devices offer up to four fast 12-bit ADCs (5 Msps), seven comparators, four operational amplifiers, up to two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and two timers dedicated to motor control. They also feature standard and advanced communication interfaces: up to two I2Cs, up to three SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.\n\n The STM32F303xB/STM32F303xC family operates in the -40 to +85 °C and -40 to +105 °C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n The STM32F303xB/STM32F303xC family offers devices in four packages ranging from 48 pins to 100 pins.\n\n The set of included peripherals changes with the device chosen.\n\n

STM32F303VCT6

ARM Cortex-M4 32b MCUFPU, up to 256KB Flash48KB SRAM 4 ADCs, 2 DAC ch., 7 comp, 4 PGA, timers, 2.0-3.6 V operation

Description TheSTM32F302xx/STM32F303xxfamilyisbasedonthehigh-performanceARM?Cortex?-M4F32-bitRISCcoreoperatingatafrequencyofupto72MHz,andembeddingafloatingpointunit(FPU),amemoryprotectionunit(MPU)andanembeddedtracemacrocell(ETM).Thefamilyincorporateshigh

STM32F303VD

帶DSP和FPU的主流混合信號(hào)ARM Cortex-M4 MCU，具有512 KB Flash、72 MHz CPU、MPU、CCM、5 Msps 12位ADC、PGA和比較器; ? Core: ARM?Cortex?-M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit) \n? Operating conditions: \n ?VDD, VDDAvoltage range: 2.0 V to 3.6 V \n? Memories \n ?Up to 512 Kbytes of Flash memory \n ?64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes. \n ?Routine booster: 16 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM) \n ?Flexible memory controller (FSMC) for static memories, with four Chip Select \n? CRC calculation unit \n? Reset and supply management \n ?Power-on/Power-down reset (POR/PDR) \n ?Programmable voltage detector (PVD) \n ?Low-power modes: Sleep, Stop and Standby \n ?VBATsupply for RTC and backup registers \n? Clock management \n ?4 to 32 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?Internal 8 MHz RC with x 16 PLL option \n ?Internal 40 kHz oscillator \n? Up to 115 fast I/Os \n ?All mappable on external interrupt vectors \n ?Several 5 V-tolerant \n? Interconnect matrix \n? 12-channel DMA controller \n? Four ADCs 0.20 μs (up to 40 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2.0 to 3.6 V? Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V \n? Seven ultra-fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V \n? Four operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V \n? Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors \n? Up to 14 timers: \n ?One 32-bit timer and two 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input \n ?Three 16-bit 6-channel advanced-control timers, with up to six PWM channels, deadtime generation and emergency stop \n ?One 16-bit timer with two IC/OCs, one OCN/PWM, deadtime generation and emergency stop \n ?Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop \n ?Two watchdog timers (independent, window) \n ?One SysTick timer: 24-bit downcounter \n ?Two 16-bit basic timers to drive the DAC \n? Calendar RTC with Alarm, periodic wakeup from Stop/Standby \n? Communication interfaces \n ?CAN interface (2.0B Active) \n ?Three I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP \n ?Up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to four SPIs, 4 to 16 programmable bit frames, two with multiplexed half/full duplex I2S interface \n ?USB 2.0 full-speed interface with LPM support \n ?Infrared transmitter \n? SWD, Cortex?-M4 with FPU ETM, JTAG \n? 96-bit unique ID;

The STM32F303xD/E family is based on the high-performance ARM?Cortex?-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (512-Kbyte Flash memory, 80-Kbyte SRAM), a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR and NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and two APB buses.\n\n The devices offer four fast 12-bit ADCs (5 Msps), seven comparators, four operational amplifiers, two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and up,to three timers dedicated to motor control. They also feature standard and advanced communication interfaces: up to three I2Cs, up to four SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.\n\n The STM32F303xD/E family operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n The STM32F303xD/E family offers devices in different packages ranging from 64 to 144 pins.\n\n Depending on the device chosen, different sets of peripherals are included.\n\n

STM32F303VE

帶DSP和FPU的主流混合信號(hào)ARM Cortex-M4 MCU，具有512 KB Flash、72 MHz CPU、MPU、CCM、5 Msps 12位ADC、PGA和比較器; ? Core: ARM?Cortex?-M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit) \n? Operating conditions: \n ?VDD, VDDAvoltage range: 2.0 V to 3.6 V \n? Memories \n ?Up to 512 Kbytes of Flash memory \n ?64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes. \n ?Routine booster: 16 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM) \n ?Flexible memory controller (FSMC) for static memories, with four Chip Select \n? CRC calculation unit \n? Reset and supply management \n ?Power-on/Power-down reset (POR/PDR) \n ?Programmable voltage detector (PVD) \n ?Low-power modes: Sleep, Stop and Standby \n ?VBATsupply for RTC and backup registers \n? Clock management \n ?4 to 32 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?Internal 8 MHz RC with x 16 PLL option \n ?Internal 40 kHz oscillator \n? Up to 115 fast I/Os \n ?All mappable on external interrupt vectors \n ?Several 5 V-tolerant \n? Interconnect matrix \n? 12-channel DMA controller \n? Four ADCs 0.20 μs (up to 40 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2.0 to 3.6 V? Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V \n? Seven ultra-fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V \n? Four operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V \n? Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors \n? Up to 14 timers: \n ?One 32-bit timer and two 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input \n ?Three 16-bit 6-channel advanced-control timers, with up to six PWM channels, deadtime generation and emergency stop \n ?One 16-bit timer with two IC/OCs, one OCN/PWM, deadtime generation and emergency stop \n ?Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop \n ?Two watchdog timers (independent, window) \n ?One SysTick timer: 24-bit downcounter \n ?Two 16-bit basic timers to drive the DAC \n? Calendar RTC with Alarm, periodic wakeup from Stop/Standby \n? Communication interfaces \n ?CAN interface (2.0B Active) \n ?Three I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP \n ?Up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to four SPIs, 4 to 16 programmable bit frames, two with multiplexed half/full duplex I2S interface \n ?USB 2.0 full-speed interface with LPM support \n ?Infrared transmitter \n? SWD, Cortex?-M4 with FPU ETM, JTAG \n? 96-bit unique ID;

The STM32F303xD/E family is based on the high-performance ARM?Cortex?-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (512-Kbyte Flash memory, 80-Kbyte SRAM), a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR and NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and two APB buses.\n\n The devices offer four fast 12-bit ADCs (5 Msps), seven comparators, four operational amplifiers, two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and up,to three timers dedicated to motor control. They also feature standard and advanced communication interfaces: up to three I2Cs, up to four SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.\n\n The STM32F303xD/E family operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n The STM32F303xD/E family offers devices in different packages ranging from 64 to 144 pins.\n\n Depending on the device chosen, different sets of peripherals are included.\n\n

STM32F303VD

ARM Cortex-M4 32b MCUFPU, up to 512KB Flash, 80KB SRAM, FSMC, 4 ADCs, 2 DAC ch., 7 comp, 4 Op-Amp, 2.0-3.6 V

STM32F303VD

Reset and supply management