STM32F3

Mainstream 32-bit MCUs Releasing your creativity

STM32F301C6

ARM Cortex-M4 32-bit MCUFPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 ??3.6 V

Description TheSTM32F301x6/8familyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcoreoperatingatafrequencyofupto72MHzandembeddingafloatingpointunit(FPU).Thefamilyincorporateshigh-speedembeddedmemories(upto64KbytesofFlashmemory,16KbytesofSRAM),and

STM32F301C8

ARM Cortex-M4 32-bit MCUFPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 ??3.6 V

Description TheSTM32F301x6/8familyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcoreoperatingatafrequencyofupto72MHzandembeddingafloatingpointunit(FPU).Thefamilyincorporateshigh-speedembeddedmemories(upto64KbytesofFlashmemory,16KbytesofSRAM),and

STM32F301C8

帶DSP和FPU的主流混合信號ARM Cortex-M4 MCU，具有64 KB Flash、72 MHz CPU、5 MSPS 12位ADC、比較器和運(yùn)算放大器; ? Core: ARM?32-bit Cortex?-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction \n? Memories \n ?32 to 64 Kbyte of Flash memory \n ?16 Kbyte of SRAM on data bus \n? CRC calculation unit \n? Reset and power management \n ?VDD, VDDAvoltage range: 2.0 to 3.6 V \n ?Power-on/Power down reset (POR/PDR) \n ?Programmable voltage detector (PVD) \n ?Low-power: Sleep, Stop, and Standby \n ?VBATsupply for RTC and backup registers \n? Clock management \n ?4 to 32 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?Internal 8 MHz RC with x 16 PLL option \n ?Internal 40 kHz oscillator \n? Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant \n? Interconnect matrix \n? 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC \n? 1 × ADC 0.20 μs (up to 15 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 2.0 to 3.6 V \n? Temperature sensor? 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V \n? Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V \n? 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V \n? Up to 18 capacitive sensing channels supporting touchkey, linear and rotary sensors \n? Up to 9 timers \n ?One 32-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input \n ?One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop \n ?Three 16-bit timers with IC/OC/OCN or PWM, deadtime gen. and emergency stop \n ?One 16-bit basic timer to drive the DAC \n ?2 watchdog timers (independent, window) \n ?SysTick timer: 24-bit downcounter \n? Calendar RTC with alarm, periodic wakeup from Stop/Standby \n? Communication interfaces \n ?Three I2Cs with 20 mA current sink to support Fast mode plus \n ?Up to 3 USARTs, 1 with ISO 7816 I/F, autobaudrate detect and Dual clock domain \n ?Up to two SPIs with multiplexed full duplex I2S \n ?Infrared transmitter \n? Serial wire debug (SWD), JTAG \n? 96-bit unique ID;

The STM32F301x6/8 family is based on the high-performance ARM?Cortex?-M4 32-bit RISC core operating at a frequency of up to 72 MHz and embedding a floating point unit (FPU). The family incorporates high-speed embedded memories (up to 64 Kbyte of Flash memory, 16 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.\n\n The devices offer a fast 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control, and up to three general-purpose 16-bit timers, and one timer to drive the DAC. They also feature standard and advanced communication interfaces: three I2Cs, up to three USARTs, up to two SPIs with multiplexed full-duplex I2S, and an infrared transmitter.\n\n The STM32F301x6/8 family operates in the –40 to +85°C and –40 to +105°C temperature ranges from at a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n The STM32F301x6/8 family offers devices in 32-, 48-, 49- and 64-pin packages.\n\n The set of included peripherals changes with the device chosen.\n\n

STM32F301K6

帶DSP和FPU的主流混合信號ARM Cortex-M4 MCU，具有64 KB Flash、72 MHz CPU、5 MSPS 12位ADC、比較器和運(yùn)算放大器; ? Core: ARM?32-bit Cortex?-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction \n? Memories \n ?32 to 64 Kbyte of Flash memory \n ?16 Kbyte of SRAM on data bus \n? CRC calculation unit \n? Reset and power management \n ?VDD, VDDAvoltage range: 2.0 to 3.6 V \n ?Power-on/Power down reset (POR/PDR) \n ?Programmable voltage detector (PVD) \n ?Low-power: Sleep, Stop, and Standby \n ?VBATsupply for RTC and backup registers \n? Clock management \n ?4 to 32 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?Internal 8 MHz RC with x 16 PLL option \n ?Internal 40 kHz oscillator \n? Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant \n? Interconnect matrix \n? 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC \n? 1 × ADC 0.20 μs (up to 15 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 2.0 to 3.6 V \n? Temperature sensor? 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V \n? Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V \n? 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V \n? Up to 18 capacitive sensing channels supporting touchkey, linear and rotary sensors \n? Up to 9 timers \n ?One 32-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input \n ?One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop \n ?Three 16-bit timers with IC/OC/OCN or PWM, deadtime gen. and emergency stop \n ?One 16-bit basic timer to drive the DAC \n ?2 watchdog timers (independent, window) \n ?SysTick timer: 24-bit downcounter \n? Calendar RTC with alarm, periodic wakeup from Stop/Standby \n? Communication interfaces \n ?Three I2Cs with 20 mA current sink to support Fast mode plus \n ?Up to 3 USARTs, 1 with ISO 7816 I/F, autobaudrate detect and Dual clock domain \n ?Up to two SPIs with multiplexed full duplex I2S \n ?Infrared transmitter \n? Serial wire debug (SWD), JTAG \n? 96-bit unique ID;

The STM32F301x6/8 family is based on the high-performance ARM?Cortex?-M4 32-bit RISC core operating at a frequency of up to 72 MHz and embedding a floating point unit (FPU). The family incorporates high-speed embedded memories (up to 64 Kbyte of Flash memory, 16 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.\n\n The devices offer a fast 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control, and up to three general-purpose 16-bit timers, and one timer to drive the DAC. They also feature standard and advanced communication interfaces: three I2Cs, up to three USARTs, up to two SPIs with multiplexed full-duplex I2S, and an infrared transmitter.\n\n The STM32F301x6/8 family operates in the –40 to +85°C and –40 to +105°C temperature ranges from at a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n The STM32F301x6/8 family offers devices in 32-, 48-, 49- and 64-pin packages.\n\n The set of included peripherals changes with the device chosen.\n\n

STM32F301K6

ARM Cortex-M4 32-bit MCUFPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 ??3.6 V

Description TheSTM32F301x6/8familyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcoreoperatingatafrequencyofupto72MHzandembeddingafloatingpointunit(FPU).Thefamilyincorporateshigh-speedembeddedmemories(upto64KbytesofFlashmemory,16KbytesofSRAM),and

STM32F301K8

ARM Cortex-M4 32-bit MCUFPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 ??3.6 V

Description TheSTM32F301x6/8familyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcoreoperatingatafrequencyofupto72MHzandembeddingafloatingpointunit(FPU).Thefamilyincorporateshigh-speedembeddedmemories(upto64KbytesofFlashmemory,16KbytesofSRAM),and

STM32F301K8

帶DSP和FPU的主流混合信號ARM Cortex-M4 MCU，具有64 KB Flash、72 MHz CPU、5 MSPS 12位ADC、比較器和運(yùn)算放大器; ? Core: ARM?32-bit Cortex?-M4 CPU with FPU (72 MHz max.), single-cycle multiplication and HW division, DSP instruction \n? Memories \n ?32 to 64 Kbyte of Flash memory \n ?16 Kbyte of SRAM on data bus \n? CRC calculation unit \n? Reset and power management \n ?VDD, VDDAvoltage range: 2.0 to 3.6 V \n ?Power-on/Power down reset (POR/PDR) \n ?Programmable voltage detector (PVD) \n ?Low-power: Sleep, Stop, and Standby \n ?VBATsupply for RTC and backup registers \n? Clock management \n ?4 to 32 MHz crystal oscillator \n ?32 kHz oscillator for RTC with calibration \n ?Internal 8 MHz RC with x 16 PLL option \n ?Internal 40 kHz oscillator \n? Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant \n? Interconnect matrix \n? 7-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC \n? 1 × ADC 0.20 μs (up to 15 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential mode, separate analog supply from 2.0 to 3.6 V \n? Temperature sensor? 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V \n? Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V \n? 1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V \n? Up to 18 capacitive sensing channels supporting touchkey, linear and rotary sensors \n? Up to 9 timers \n ?One 32-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input \n ?One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop \n ?Three 16-bit timers with IC/OC/OCN or PWM, deadtime gen. and emergency stop \n ?One 16-bit basic timer to drive the DAC \n ?2 watchdog timers (independent, window) \n ?SysTick timer: 24-bit downcounter \n? Calendar RTC with alarm, periodic wakeup from Stop/Standby \n? Communication interfaces \n ?Three I2Cs with 20 mA current sink to support Fast mode plus \n ?Up to 3 USARTs, 1 with ISO 7816 I/F, autobaudrate detect and Dual clock domain \n ?Up to two SPIs with multiplexed full duplex I2S \n ?Infrared transmitter \n? Serial wire debug (SWD), JTAG \n? 96-bit unique ID;

The STM32F301x6/8 family is based on the high-performance ARM?Cortex?-M4 32-bit RISC core operating at a frequency of up to 72 MHz and embedding a floating point unit (FPU). The family incorporates high-speed embedded memories (up to 64 Kbyte of Flash memory, 16 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.\n\n The devices offer a fast 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control, and up to three general-purpose 16-bit timers, and one timer to drive the DAC. They also feature standard and advanced communication interfaces: three I2Cs, up to three USARTs, up to two SPIs with multiplexed full-duplex I2S, and an infrared transmitter.\n\n The STM32F301x6/8 family operates in the –40 to +85°C and –40 to +105°C temperature ranges from at a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n The STM32F301x6/8 family offers devices in 32-, 48-, 49- and 64-pin packages.\n\n The set of included peripherals changes with the device chosen.\n\n

STM32F301R6

ARM Cortex-M4 32-bit MCUFPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 ??3.6 V

Description TheSTM32F301x6/8familyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcoreoperatingatafrequencyofupto72MHzandembeddingafloatingpointunit(FPU).Thefamilyincorporateshigh-speedembeddedmemories(upto64KbytesofFlashmemory,16KbytesofSRAM),and

STM32F301R8

ARM Cortex-M4 32-bit MCUFPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 ??3.6 V

Description TheSTM32F301x6/8familyisbasedonthehigh-performanceARM?Cortex?-M432-bitRISCcoreoperatingatafrequencyofupto72MHzandembeddingafloatingpointunit(FPU).Thefamilyincorporateshigh-speedembeddedmemories(upto64KbytesofFlashmemory,16KbytesofSRAM),and