STM32F101VG

主流基本型系列ARM Cortex-M3 MCU，具有1 MB Flash和36 MHz CPU; ? Core: ARM?32-bit Cortex?-M3 CPU with MPU \n ?36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance \n ?Single-cycle multiplication and hardware division \n? Memories \n ?768 Kbytes to 1 Mbyte of Flash memory (dual bank with read-while-write capability) \n ?80 Kbytes of SRAM \n ?Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories \n ?LCD parallel interface, 8080/6800 modes \n? Clock, reset and supply management \n ?2.0 to 3.6 V application supply and I/Os \n ?POR, PDR, and programmable voltage detector (PVD) \n ?4-to-16 MHz crystal oscillator \n ?Internal 8 MHz factory-trimmed RC \n ?Internal 40 kHz RC with calibration capability \n ?32 kHz oscillator for RTC with calibration \n? Low power \n ?Sleep, Stop and Standby modes \n ?VBATsupply for RTC and backup registers \n? 1 x 12-bit, 1 μs A/D converters (up to 16 channels) \n ?Conversion range: 0 to 3.6 V \n ?Temperature sensor \n? 2 × 12-bit D/A converters \n? DMA \n ?12-channel DMA controller \n ?Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs? Up to 112 fast I/O ports \n ?51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant \n? Debug mode \n ?Serial wire debug (SWD) & JTAG interfaces \n ?Cortex-M3 Embedded Trace Macrocell? \n? Up to 15 timers \n ?Up to ten 16-bit timers, with up to 4 IC/OC/PWM or pulse counters \n ?2 × watchdog timers (Independent and Window) \n ?SysTick timer: a 24-bit downcounter \n ?2 × 16-bit basic timers to drive the DAC \n? Up to 10 communication interfaces \n ?Up to 2 x I2C interfaces (SM7816 interface, LIN, IrDA capability, modem control) \n ?Up to 3 SPIs (18 Mbit/s) \n? CRC calculation unit, 96-bit unique ID \n? ECOPACK?packages;

The STM32F101xF and STM32F101xG access line family incorporates the high-performance ARM?Cortex?-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 1 Mbyte and SRAM of 80 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, ten general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.\n\n The STM32F101xx XL-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n These features make the STM32F101xx XL-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems , power meters, and video intercom.\n\n

STM32F101VG

XL-density access line, ARM-based 32-bit MCU with 768 KB to 1 MB Flash, 15 timers, 1 ADC and 10 communication interfaces

STM32F101xB

Medium-densityaccessline,ARM-based32-bitMCUwith64or128KBFlash,6timers,ADCand7communicationinterfaces

STM32F101xB

Medium-densityaccessline,ARM-based32-bitMCUwith64or128KBFlash,6timers,ADCand7communicationinterfaces

STM32F101XB

Medium-densityaccessline,ARM-based32-bitMCUwith64or128KBFlash,6timers,ADCand7communicationinterfaces

STM32F101XB

Accessline,advancedARM-based32-bitMCUwithFlashmemory,six16-bittimers,ADCandsevencommunicationinterfaces

Description TheSTM32F101x4andSTM32F101x6Low-densityaccesslinefamilyincorporatesthehigh-performanceARMCortex?-M332-bitRISCcoreoperatingata36MHzfrequency,high-speedembeddedmemories(Flashmemoryof16to32KbytesandSRAMof4to6Kbytes),andanextensiverangeofenhanc

STM32F101XB

Accessline,advancedARM-based32-bitMCUwithFlashmemory,six16-bittimers,ADCandsevencommunicationinterfaces

STM32F101XC

High-densityaccessline,ARM-based32-bitMCUwith256to512KBFlash,9timers,1ADCand10communicationinterfaces

STM32F101xC

High-densityaccessline,ARM-based32-bitMCUwith256to512KBFlash,9timers

STM32F101xD

High-densityaccessline,ARM-based32-bitMCUwith256to512KBFlash,9timers