STM32F101RE

主流基本型系列ARM Cortex-M3 MCU，具有512 KB Flash和36 MHz CPU; ? Core: ARM?32-bit Cortex?-M3 CPU \n ?36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance \n ?Single-cycle multiplication and hardware division \n? Memories \n ?256 to 512 Kbytes of Flash memory \n ?up to 48 Kbytes of SRAM \n ?Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories \n ?LCD parallel interface, 8080/6800 modes \n? Clock, reset and supply management \n ?2.0 to 3.6 V application supply and I/Os \n ?POR, PDR, and programmable voltage detector (PVD) \n ?4-to-16 MHz crystal oscillator \n ?Internal 8 MHz factory-trimmed RC \n ?Internal 40 kHz RC with calibration capability \n ?32 kHz oscillator for RTC with calibration \n? Low power \n ?Sleep, Stop and Standby modes \n ?VBATsupply for RTC and backup registers \n? 1 x 12-bit, 1 μs A/D converters (up to 16 channels) \n ?Conversion range: 0 to 3.6 V \n ?Temperature sensor \n? 2 × 12-bit D/A converters \n? DMA \n ?12-channel DMA controller \n ?Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs? Up to 112 fast I/O ports \n ?51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant \n? Debug mode \n ?Serial wire debug (SWD) & JTAG interfaces \n ?Cortex-M3 Embedded Trace Macrocell? \n? Up to 9 timers \n ?Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counters \n ?2 × watchdog timers (Independent and Window) \n ?SysTick timer: a 24-bit downcounter \n ?2 × 16-bit basic timers to drive the DAC \n? Up to 10 communication interfaces \n ?Up to 2 x I2C interfaces (SMSTM32F101xC, STM32F101xD, STM32F101xE7816 interface, LIN, IrDA capability, modem control) \n ?Up to 3 SPIs (18 Mbit/s) \n? CRC calculation unit, 96-bit unique ID \n? ECOPACK?packages;

The STM32F101xC, STM32F101xD and STM32F101xE access line family incorporates the high-performance ARM?Cortex?-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 48 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, four general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.\n\n The STM32F101xx high-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.\n\n These features make the STM32F101xx high-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems and video intercom.\n\n

STM32F101RE

High-density access line, ARM-based 32-bit MCU with 256 to 512 KB Flash, 9 timers, 1 ADC and 10 communication interfaces

STM32F101RE

High-density access line, ARM-based 32-bit MCU with 256 to 512 KB Flash, 9 timers

STM32F101RE

High-density access line, ARM-based 32-bit MCU

STM32F101RET6TR

High-density access line, ARM-based 32-bit MCU with 256 to 512 KB Flash, 9 timers, 1 ADC and 10 communication interfaces

STM32F101RET6XXX

High-density access line, ARM-based 32-bit MCU with 256 to 512 KB Flash, 9 timers, 1 ADC and 10 communication interfaces