STM32F031F4數(shù)據(jù)手冊(cè)ST中文資料規(guī)格書

描述 Description

The STM32F031x4/x6 microcontrollers incorporate the high-performance ARM?Cortex?-M0 32-bit RISC core operating at a 48 MHz maximum frequency, high-speed embedded memories (up to 32 Kbytes of Flash memory and 4 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (one I2C, one SPI/ I2S and one USART), one 12-bit ADC, up to five general-purpose 16-bit timers, a 32-bit timer and an advanced-control PWM timer.

The STM32F031x4/x6 microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.

The STM32F031x4/x6 microcontrollers include devices in five different packages ranging from 20 pins to 48 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included. The description below provides an overview of the complete range of STM32F031x4/x6 peripherals proposed.

These features make the STM32F031x4/x6 microcontrollers suitable for a wide range of applications such as application control and user interfaces, handheld equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.

特性 Features

? Core: ARM?32-bit Cortex?-M0 CPU, frequency up to 48 MHz
? Memories
?16 to 32 Kbytes of Flash memory
?4 Kbytes of SRAM with HW parity
? CRC calculation unit
? Reset and power management
?Digital and I/Os supply: 2.0 to 3.6 V
?Analog supply: VDDA = from VDDto 3.6 V
?Power-on/Power-down reset (POR/PDR)
?Programmable voltage detector (PVD)
?Low power modes: Sleep, Stop and Standby
?VBATsupply for RTC and backup registers
? Clock management
?4 to 32 MHz crystal oscillator
?32 kHz oscillator for RTC with calibration
?Internal 8 MHz RC with x6 PLL option
?Internal 40 kHz RC oscillator
? Up to 39 fast I/Os
?All mappable on external interrupt vectors
?Up to 25 I/Os with 5 V tolerant capability
? 5-channel DMA controller
? 1 × 12-bit, 1.0 μs ADC (up to 10 channels)
?Conversion range: 0 to 3.6V
?Separate analog supply from 2.4 up to 3.6 V
? Up to 9 timers
?1 x 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop
?1 x 32-bit and 1 x 16-bit timer, with up to 4 IC/OC, usable for IR control decoding
?1 x 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop
?1 x 16-bit timer, with IC/OC and OCN, deadtime generation, emergency stop and modulator gate for IR control
?1 x 16-bit timer with 1 IC/OC
?Independent and system watchdog timers
?SysTick timer: 24-bit downcounter
? Calendar RTC with alarm and periodic wakeup from Stop/Standby
? Communication interfaces
?1 x I2C interface; supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, and wakeup from Stop mode
?1 x USART supporting master synchronous SPI and modem control; one with ISO7816 interface, LIN, IrDA capability auto baud rate detection and wakeup feature
?1 x SPI (18 Mbit/s) with 4 to 16 programmable bit frames, with I2S interface multiplexed
? Serial wire debug (SWD)
? 96-bit unique ID
? Extended temperature range: -40 to +105°C
? All packages ECOPACK?2