STEVAL-TLL001V1開發板套件編程器的評估板-LED驅動器規格書PDF中文資料

STEVAL-TLL001V1屬于開發板套件編程器的評估板-LED驅動器。由意法半導體集團制造生產的STEVAL-TLL001V1評估板 - LED 驅動器LED 驅動器評估板是帶有元器件的電路板，用于提供特定電路或器件的工作實例。該系列評估板提供一個 LED 驅動器實例，用于可調節閃爍、模擬亮度、背光、雙極開關、升壓轉換器、亮度控制、相機閃光燈、可調光、恒流和 RGB 控制，以及更多其他應用。

Description

This evaluation board is based on the STLD40D that is a boost converter that operates from 3.0 V to 5.5 V and can provide an output voltage as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switches and can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSW is fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the led current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. Applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed.

Features

■ Inductor switches boost controller

■ PFM mode control

■ High efficiency over wide range of input voltage from 3.0 V to 5.5 V

■ Over-voltage protection with automatic restart

■ Adjustable peak current limit

■ Enable pin with possibility of PWM dimming control

■ Low shutdown current