ST6210CB3中文資料意法半導體數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The ST62 gang programmers are designed for programming up to 10 EPROM or OTP devices. It can run either in standalone or remote mode under control of a Windows compatible PC.

In standalone mode, the target ST62 MCUs are programmed with a simple key operation directly from a master EPROM memory or from a master EPROM MCU. Two color LEDs indicate for each target device the operational pass or fail. Both VERIFY and BLANK CHECK functions are pro vided.

In Remote mode, the gang programmer is connected to a PC through an RS232 serial channel. Object code in either S19 or INTEL HEX format is read from disk files to program the target devices.

The Windows software also offers VERIFY, BLANK CHECK, READ master and other utility functions. The software allows various user friend ly facilities, such as re-instating the same pro gramming session, user selectable programming steps.

The gang programmer is made up of a two parts, a base unit common to all ST62XX devices and a dedicated package adaptator.

HARDWARE FEATURES

■ Programs simultaneously up to 10 ST62Exx EPROM and OTP MCUs

■ Standalone and PC driven modes

■ DIP and SO packages supported

SOFTWARE FEATURES

■ Windows based software

■ S19 or INTEL hex file format