SN74HC241

具有三態(tài)輸出的 8 通道、2V 至 6V 緩沖器; ? Wide Operating Voltage Range of 2 V to 6 V\n? High-Current Outputs Drive Up To 15 LSTTL Loads\n? Low Power Consumption, 80-μA Max ICC\n? Typical tpd =11 ns\n? ±6-mA Output Drive at 5 V\n? Low Input Current of 1 μA Max\n? 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers;

These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ?HC241 devices are organized as two 4-bit buffers/drivers with separate output-enable (1OE\\ and 2OE) inputs. When 1OE\\ is low or 2OE is high, the device passes noninverted data from the A inputs to the Y outputs. When 1OE\\ is high or 2OE is low, the outputs for the respective buffers/drivers are in the high-impedance state.

SN74HC241

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241DW

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241DW

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241DW

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241DWE4

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241DWE4

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN74HC241DWG4

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS