SGM721

11MHz, Rail-to-Rail I/O CMOS Operational Amplifier; ? 輸入失調電壓：4mV（最大值）\n? 高增益帶寬積：11MHz\n? 高壓擺率：8.5V/μs\n? 2V 步進下穩定時間至 0.1%：0.21μs\n? 過載恢復時間：0.6μs\n? 低噪聲：10kHz 時為 8.5nV/√Hz\n? 軌到軌輸入和輸出\n? 電源電壓范圍：2.1V 至 5.5V\n? 輸入電壓范圍：-0.1V 至 5.6V，VS = 5.5V\n? 低功耗：1.2mA（典型值）\n? -40℃ 至 +125℃ 工作溫度范圍\n? 提供綠色 SC70-5、SOT-23-5 和 SOIC-8 封裝;

SGM721/2/3/4 是一系列單路、雙路和四路運算放大器，它們針對低壓、低噪聲和低功耗操作進行了特別優化。這些運算放大器能夠在 2.1V 至 5.5V 的單電源下工作，并且靜態電流消耗非常低。例如，SGM723 在斷電模式下的電源電流小于 1μA。\nSGM721/2/3/4 系列的運算放大器具有最大 4mV 的輸入失調電壓。它們的最小輸入共模電壓范圍在負軌以下 0.1V 以內，而輸出擺幅即使在重負載條件下也能實現軌到軌。這些運算放大器還擁有 11MHz 的高增益帶寬積和 8.5V/μs 的壓擺率，這些特性使得它們適用于多種不同的應用場景。\n在封裝方面，SGM721 提供了綠色 SC70-5、SOT-23-5 和 SOIC-8 封裝選項。SGM722 則有綠色 SOIC-8、MSOP-8 和 TSSOP-8 封裝。SGM723 提供了綠色 SOT-23-6 和 SOIC-8 封裝。而 SGM724 有綠色 SOIC-14 和 TSSOP-14 封裝。所有這些運算放大器的工業溫度范圍均為 -40℃ 至 +125℃。\n

SGM721

970關A, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier

SGM721

CMOS Operational Amplifiers

SGM721

CMOS Operational Amplifiers

SGM721

CMOS Operational Amplifiers

SGM72108

SP8T LTE Switch with MIPI RFFE Interface; ? Supply Voltage Range: 2.4V to 4.8V\n\n? Advanced Silicon-On-Insulator (SOI) Process\n\n? Frequency Range: 0.1GHz to 3.0GHz\n\n? Low Insertion Loss: 0.65dB (TYP) at 2.7GHz\n\n? MIPI RFFE Interface Compatible\n\n? No External DC Blocking Capacitors Required\n\n? Available in a Green UTQFN-2×2-14AL Package;

The SGM72108 is a single-pole/eight-throw (SP8T) antenna switch, which supports from 0.1GHz to 3.0GHz. The device features low insertion loss and high isolation, which make it suitable for high linearity receiving applications. It also has the advantage of high linearity performance. The SGM72108 is not subject to cellular interference and is applied to multi-mode and multi-band LTE mobile phones.\nThe SGM72108 has the ability to integrate SP8T RF switch and MIPI controller on silicon-on-insulator (SOI) process. Internal driver and decoder for switch control signals are offered by the controller, which makes it flexible in RF path band and routing selection.\nNo external DC blocking capacitors are required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost.\nThe SGM72108 is available in a Green UTQFN-2×2-14AL package.\n

SGM721_15

CMOS Operational Amplifiers

SGM721_16

CMOS Operational Amplifiers

SGM72106

4G Switch;

ETC

SGM721XC5/TR

970關A, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier