SGM2567

5.5V, 4A, 15mΩ RON Load Switch with Reverse Current Protection

GENERALDESCRIPTION TheSGM2567isasingleloadswitchwithreverse currentprotectionfunction.Thedevicecanoperate from1Vto5.5Vsinglesupplyandhastheabilityto driveupto4Acontinuouscurrent. Thedevicecontainsa15mΩlowRONN-MOSFET controlledbytheONpin.Whenthepowe

SGM2567

5.5V, 4A, 15mΩ R_ON Load Switch with Reverse Current Protection; ? Input Voltage Range: 1V to 5.5V\n? Maximum Continuous Current: 4A\n? Low On-ResistanceRON = 15mΩ at VIN = 5VRON = 15mΩ at VIN = 3.3V\n? Low Shutdown Current: 170nA (TYP)\n? Reverse Current Protection When Disabled\n? Low Threshold 1.8V GPIO Control Input\n? Bidirectional Power Supply for Power Zone Application\n? Controlled Slew Rate to Avoid Inrush Current\n? Over-Temperature Protection\n? Quick Output Discharge\n? Available in a Green WLCSP-1.45×0.95-6B Package;

The SGM2567 is a single load switch with reverse current protection function. The device can operate from 1V to 5.5V single supply and has the ability to drive up to 4A continuous current.\n\nThe device contains a 15mΩ low RON N-MOSFET controlled by the ON pin. When the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.\n\nThe device supports a wide input voltage range, which is suitable for many different voltage rails. The rise time is used to avoid inrush current. The SGM2567 offers the quick output discharge function in disable status.\n\nThe SGM2567 is available in a Green WLCSP-1.45×0.95-6B package.\n

SGM2567A

5.5V, 4A, 15mΩ R_ON Load Switch with Reverse Current Protection; ? Input Voltage Range: 2.2V to 5.5V\n\n? Maximum Continuous Current: 4A\n\n? Low On-Resistance\nRON = 15mΩ at VIN = 5V\nRON = 15mΩ at VIN = 3.3V\n\n? Low Shutdown Current: 0.31μA (TYP)\n\n? Reverse Current Protection When Disabled\n\n? Low Threshold 1.8V GPIO Control Input\n\n? Bidirectional Power Supply for Power Zone Application\n\n? Quick Output Discharge\n\n? Internal Fixed Slew Rate to Avoid Inrush Current\n\n? Over-Temperature Protection\n\n? Available in a Green WLCSP-1.45×0.95-6B Package;

The SGM2567A is a single load switch with reverse current protection function. The device can operate from 2.2V to 5.5V single supply and has the ability to drive up to 4A continuous current.\nThe device contains a 15mΩ low RON N-MOSFET controlled by the ON pin. When the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.\nThe device supports a wide input voltage range, which is suitable for many different voltage rails. The rise time is used to avoid inrush current. The SGM2567A offers the quick output discharge function in disable status.\nThe SGM2567A is available in a Green WLCSP- 1.45×0.95-6B package.\n

SGM2567S

5.5V, 3.4A, 11mΩ RON, Load Switch with Controlled Turn-On; ● Input Voltage Range: 1.8V to 5.5V\n● Low On-Resistance\n? RON = 11mΩ at VIN = 5V\n? RON = 11mΩ at VIN = 3.3V\n? RON = 12mΩ at VIN = 1.8V\n● Low Shutdown Current: 0.02μA (TYP)\n● Low Threshold 1.8V GPIO Control Input\n● Quick Output Discharge\n● Internal Fixed Slew Rate to Avoid Inrush Current\n● Over-Temperature Protection\n● Available in a Green WLCSP-1.5×0.95-6B Package;

The SGM2567S is an ultra-low on-resistance, integrated N-MOSFET, single-channel load switch. The device operates over a wide input voltage range of 1.8V to 5.5V. It has the ability to drive up to 3.4A continuous current.?\nThe device contains an 11mΩ low RON N-MOSFET controlled by the ON pin. During power-up, a smart pull-down resistor is used to avoid the ON pin floating. Once the ON pin reaches a high voltage (> VIH), the smart pull-down resistor is disconnected, which reduces the standby current and power loss. The small package and low RON make the device very suitable for space limited, battery powered applications.?\nThe SGM2567S is available in a Green WLCSP-1.5×0.95-6B package.\n

SGM2588KYN5G/TR

SGMICRO
SOT-23-5