QPF4518

5 GHz 802.11a/n/ac Wi-Fi Front End Module; ? 5150 – 5925 MHz\n? POUT = +23dBm MCS9 VHT80 -35dB Dynamic EVM\n? POUT = +24.5dBm MCS7 HT20/40 -30dB Dynamic EVM\n? POUT = +25dBm MCS0 HT20 Spectral Mask Compliance\n? 160MHz Bandwidth and MCS11 Capable\n? Optimized for +5 V Operation\n? 32 dB Tx Gain\n? 2 dB Noise Figure\n? 16 dB Rx Gain & 6.5 dB Bypass Loss\n? 25 dB 2.4 GHz Rejection on Rx Path\n? Integrated RF Power Detector Coupler as well as DC Power Detector\n;

Qorvo's QPF4518 is an integrated front end module (FEM) designed for Wi-Fi 802.11a/n/ac systems. The compact form factor and integrated matching minimizes layout area in the application.\nPerformance is focused on optimizing the PA for a 5V supply voltage that conserves power consumption while maintaining the highest linear output power and leading edge throughput.\nThe receive path is pinned out so external filtering can be added in the optimal position. Integrated die level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation are included.\nThere are two options for power detect, a DC power detector which has voltage output and an RF power detector with an RF output from a directional coupler.\nThe QPF4518 integrates a 5 GHz power amplifier (PA), single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA) into a single device\n

QPF4518

Wi-Fi Front End Module

QPF4518M

5 GHz 802.11a/n/ac Wi-Fi Integrated PA Module; ? 5150 – 5925 MHz\r\n? POUT = +23dBm MCS9 VHT80 -35dB Dynamic EVM\r\n? POUT = +24.5dBm MCS7 HT20/40 -30dB Dynamic EVM\r\n? POUT = +25dBm MCS0 HT20 Spectral Mask Compliance\r\n? 160MHz Bandwidth and MCS11 Capable\r\n? Optimized for +5V Operation\r\n? 32?dB Tx Gain\r\n? 2dB Noise Figure\r\n? 16dB Rx Gain & 6.5dB Bypass Loss\r\n? 25dB 2.4GHz Rejection on Rx Path\r\n? Integrated;

The Qorvo? QPF4518M is an integrated front end module (FEM) designed for Wi-Fi 5 (11ac) systems. The compact form factor and integrated matching minimizes layout area in the application.\r\n Performance is focused on optimizing the PA for a 5V supply voltage that conserves power consumption while maintaining the highest linear output power and leading edge throughput.\r\n The receive path is pinned out so external filtering can be added in the optimal position. Integrated die level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation are included.\r\n There are two options for power detect, a DC power detector which has voltage output and an RF power detector with an RF output from a directional coupler.\r\n The QPF4518M integrates a 5 GHz power amplifier (PA), single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA) into a single device

QPF4518M

Wi-Fi Front End Module

QPF4518MPCK401

Wi-Fi Front End Module

QPF4518MSB

Wi-Fi Front End Module

QPF4518MSQ

Wi-Fi Front End Module

QPF4518MSR

Wi-Fi Front End Module

QPF4518MTR13

Wi-Fi Front End Module

QPF4518PCK401

Wi-Fi Front End Module