PM545

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

PM5451

HyPHY-AXS OTN Processor for CPE/Muxponders; Support for ODU0/ODUflex\nSupport for Tri-FEC\nG.709 compliant GMP multiplexing\nAdd-drop ODUk capabilities from OTU2 ring\nPTP over OTN support\nSyncE and 1588v2 support\n8x multi-rate SERDES for direct connection to SFP opticaltransceivers, independently tunable from 16 Mbit/s to 5Gbit/s\nAny-Service Any-Port configurable:\n? OTU1\n? OC-3/12/48 or STM-1/4/16\n? 100/1000 Mbps full-duplex Ethernet\n? Bit transparent clients, including, but not limited to,DVB-ASI, SD-SDI, HD-SDI, DV6000, ISC, ISCIII and2.5G/5G Infiniband\n? Fibre Channel FC-15, FC-25, FC-50, FC-100, FC-200,FC-400, FICON and ESCON\n? CPRI clients up to 4.9 Gbit/s\nOTU2 Line Interfaces\n? Dual integrated SERDES for direct connection to XFP or SFP+ modules\nIntegrated IEEE 802.3 compliant Media Access Controllers(MAC)\nCompatible with ITU-T G.709, ITU-T G.798 and ITU-T G.975\nSupports ODU0 and ODUflex\nOne-stage or two-stage ODU multiplexing\nTwo instantiations of independently-configurable Tri-FEC for OTU2:\n? Interoperable G.709 RS (255, 239) FEC with 6.2 dB coding gain at 10- 15 BERout\n? Interoperable G.975.1 Annex I.4 Strong FEC (8.9 db gain at BERout = 10-15 @ 7% OH)\n? Interoperable G.975.1 Annex I.7 Strong FEC (8.4 db gain at BERout = 10-15 @ 7% OH)\nMaps a wide variety of protocols into OTN;

The PM5451 HyPHY-AXS is an OTN access platform on a chip that enables a new class of compact transport solutions for the Metro Access network. It is optimized for the backhaul of xPON OLTs, 3G/LTE mobile base stations and Enterprise Ethernet services over a unified Metro OTN infrastructure. By integrating multi-rate, multi-protocol client interfaces, Ethernet MACs with onboard support for PTP/SyncE and OTN framing, mapping and multiplexing, the HyPHY-AXS enables compact metro access platforms with the highest level of feature-integration at an optimal footprint, power and Bills-of-Material (BOM) cost.\n\n The HyPHY-AXS supports a rich set of OTN framing, mapping and multiplexing resources for a variety of client protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON and multi-rate bit transparent services such as video. It provides a simple path towards extending designs to enable support for higher client port densities and fabric-connected applications using the PM5450 HyPHY-20Gflex OTN processor.\n\n Applications? Compact metro access platforms? Universal Muxponder/ADM cards for OTPs and ROADMs\n\n\n\n \n\n

PM5456

HyPHY-10Gflex OTN Processor; Adds several capabilities to the HyPHY family, including support for 16x ODU0 and 8x ODUflex\nTwo-stage ODUjk multiplexing\nTransponder Mode: Maps a 10G client to OTU2, OC-192/STM-64 network or system interfaces\nMuxponder Mode: Maps SFP clients to OTU2 or OC-192/STM-64 network or system interfaces\nSupport for one of the following services:\n? OTU2 (including overclocked rates up to 11.32 Gbit/s)\n? OC-192/STM-64\n? 10GE-LAN\n? 10GE-WAN\n? FC-800 / FC-1200\n? CPRI 9.8304 Gbit/s\n? OTU1 (up to 8)\n? OC-3/12 or STM-1/4\n? OC-48/STM-16 (up to 4)\n? 100/1000 Mbps full-duplex Ethernet\n? Bit transparent clients, including but not limited to DVB-ASI, SD-SDI, HD-SDI, DV6000, ISC, ISCIII, and 2.5G/5G Infiniband\n? Fibre Channel FC-15, FC-25, FC-50, FC-100, FC-200, FC-400, FICON, ESCON\n? CPRI clients up to 4.9 Gbit/s\nIntegrated IEEE 802.3 compliant media access controllers (MAC)\nIntegrated 10GE WAN Interface sublayer (WIS) framing and descrambling\nCompatible with ITU-T G.709, ITU-T G.798 and ITU-T G.975\nSupports 16x ODU0 and 8x ODUflex(CBR) and ODUflex(GFP)\nUp to six levels of Tandem Connection Monitoring (TCM)\nTwo independently-configurable Tri-FEC instantiations for OTU2:\n? Interoperable G.709 RS (255, 239) FEC with 6.2 dB coding gain at 10-15 BERout\n? Interoperable G.975.1 Annex I.4 Strong FEC (8.9 db gain at BERout = 10-15 @ 7% OH)\n? Interoperable G.975.1 Annex I.7 Strong FEC (8.4 db gain at BERout = 10-15 @ 7% OH)\nMaps a wide variety of protocols into OTN and/or SONET/SDH;

The PM5456 HyPHY-10Gflex device represents Microchip’s 2nd generation of OTN-enabled, high-capacity system-on-a-chip solutions for Multi-Service Provisioning Platforms (MSPPs), Wavelength Division Multiplexing (WDM) Platforms, Reconfigurable Optical Add-Drop Multiplexers (ROADMs), Optical Transport Platforms (OTPs), Packet-OTPs, and Optical Access Platforms. The HyPHY10Gflex brings ODU0 and ODUflex capabilities to universal multi-rate, multiservice line, transponder, and muxponder cards.The HyPHY-10Gflex is pin-compatible to the PM5426 HyPHY-10G and delivers unprecedented single-chip scalability and feature integration to enable optimal footprint, power, and cost efficiency. The HyPHY-10Gflex provides a rich set of framing, mapping and multiplexing resources for a variety of protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON, and multi-rate bit transparent services such as video.Applications? Universal line cards for MSPPs and OTPs? Single-chip optical access platforms? Transponder, Muxponder and MSPP-on-a-wavelength cards for ROADMs? Ported or portless packet/TDM interworking server cards? Multi-Service aggregation cards for switches and routers? WAN network cards for OLTs and DSLAMs\n\n \n\n

PM5451A-FEI

HYPHY AXS;

PM545CE

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

PM545D

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

PM545K

Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

PM5451A-FEI

包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 類別：集成電路（IC） 專用 描述：IC INTERFACE SPECIALIZED

PM5456A-FEI

包裝：托盤 功能：- 類別：集成電路（IC） 控制器 描述：HYPHY 10GFLEX

PM5456A-FGI

包裝：托盤 功能：- 類別：集成電路（IC） 控制器 描述：1X10G + 1X10G/8XSFP MULTI-RATE,