PE4371

N Female Bulkhead Mount Connector Crimp/Crimp Attachment for RG55, RG142, RG223, RG400, .640 inch DD Hole; Key Specifications (Click on Data Sheet Above for Additional Details).\n? PolarityStandard\n? Connector SeriesN\n? Connector GenderFemale\n? Impedance50 Ohm\n? Body StyleStraight\n? Attachment MethodCrimp/Crimp\n? Mount MethodBulkhead\n? Minimum FrequencyDC\n? Maximum Frequency6 GHz\n? Interface Type 1RG55\n? Interface Type 2RG142\n? Interface Type 3RG223\n? Interface Type 4RG400\n;

N Female Bulkhead Mount Connector Crimp/Crimp Attachment for RG55, RG142, RG223, RG400, .640 inch DD Hole\n\nPE4371 type N female bulkhead coaxial connector has an interface type of RG55, RG142, RG223, RG400 and a 50 Ohm impedance. Pasternack type N female bulkhead connector uses shield/contact crimp/crimp as an attachment method. Our female type N coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz.\n\nThe Pasternack N type female bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack N type coaxial connector has a brass body with nickel plating. Our PE4371 N type connector uses brass contact and a nickel plating material. This type N female bulkhead coaxial RF connector is RoHS and REACH compliant.\n\nThis Pasternack female N type bulkhead connector will ship the same day as purchased. Our bulkhead type N female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well.

PE4371

N Female Bulkhead Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400, .640 inch DD Hole

PE4371

N Female Bulkhead Mount Connector Crimp/Solder Attachment

PE43712

UltraCMOS? RF Digital Step Attenuator; ? Flexible attenuation steps of 0.25 dB, 0.5 dB and 1 dB up to 31.75 dB\n? Glitch-less attenuation state transitions\n? Monotonicity: 0.25 dB up to 4 GHz, 0.5 dB up to 5 GHz and 1 dB up to 6 GHz\n? Extended +105°C operating temperature\n? Parallel and serial programming interfaces with serial addressability\n? Packaging—32-lead 5 × 5 mm QFN\n\n;

The PE43712 is a 50Ω, HaRP? technology-enhanced, 7-bit RF digital step attenuator (DSA) that supports a broad frequency range from 9 kHz to 6 GHz. It features glitch-less attenuation state transitions and supports 1.8V control voltage and an extended operating temperature range to +105°C, making this device ideal for many broadband wireless applications.\n The PE43712 is a pin-compatible upgraded version of the PE43601 and PE43701. An integrated digital control interface supports both serial addressable and parallel programming of the attenuation, including the capability to program an initial attenuation state at power-up.\n The PE43712 cover a 31.75 dB attenuation range in 0.25 dB, 0.5 dB and 1 dB steps. It is capable of maintaining 0.25 dB monotonicity through 4 GHz, 0.5 dB monotonicity through 5 GHz and 1 dB monotonicity through 6 GHz. In addition, no external blocking capacitors are required if 0 VDC is present on the RF ports.\n

PE43713

UltraCMOS? RF Digital Step Attenuator; ? Flexible attenuation steps of 0.25 dB, 0.5 dB and 1 dB up to 31.75 dB\n? Glitch-less attenuation state transitions\n? Monotonicity: 0.25 dB up to 4 GHz, 0.5 dB up to 5 GHz and 1 dB up to 6 GHz\n? Extended +105°C operating temperature\n? Parallel and serial programming interfaces with serial addressability\n? Packaging—32-lead 5 × 5 mm QFN\n\n;

The PE43713 is a 50Ω, HaRP? technology-enhanced, 7-bit RF digital step attenuator (DSA) that supports a broad frequency range from 9 kHz to 6 GHz. It features glitch-less attenuation state transitions, supports 1.8V control voltage and includes an extended operating temperature range to +105°C and optional VSS_EXT bypass mode to improve spurious performance, making this device ideal for test and measurement (T&M).\n The PE43713 is a pin-compatible upgraded version of the PE43703. An integrated digital control interface supports both serial addressable and parallel programming of the attenuation, including the capability to program an initial attenuation state at power-up.\n The PE43713 covers a 31.75 dB attenuation range in 0.25 dB, 0.5 dB and 1 dB steps. It is capable of maintaining 0.25 dB monotonicity through 4 GHz, 0.50 monotonicity through 5 GHz and 1 dB monotonicity through 6 GHz. In addition, no external blocking capacitors are required if 0 VDC is present on the RF ports.\n

PE4371_16

N Female Bulkhead Mount Connector Crimp/Solder Attachment

PE43711

UltraCMOS RF Digital Step Attenuator, 9 kHz-6 GHz

PE43711A-Z

UltraCMOS RF Digital Step Attenuator, 9 kHz-6 GHz

PE43712

UltraCMOS RF Digital Step Attenuator, 9 kHz?? GHz

PE43712A-Z

UltraCMOS RF Digital Step Attenuator, 9 kHz?? GHz