PCA8575D

Remote 16-bit I/O expander for I2C-bus with interrupt

Generaldescription ThePCA8575providesgeneralpurposeremoteI/Oexpansionformostmicrocontrollerfamiliesviathetwo-linebidirectionalI2C-bus(serialclock(SCL),serialdata(SDA)). Thedeviceconsistsofa16-bitquasi-bidirectionalportandanI2C-businterface.ThePCA8575hasa

PCA8575D

Remote 16-bit I/O expander for I2C-bus with interrupt; 400 kHz I2C-bus interface\n2.3 V to 5.5 V operation with 5.5 V tolerant I/Os\n16-bit remote I/O pins that default to inputs at power-up\nLatched outputs with 25 mA sink capability for directly driving LEDs\nTotal package sink capability of 400 mA\nActive LOW open-drain interrupt output\n8 programmable slave addresses using 3 address pins\nReadable device ID (manufacturer, device type, and revision)\nLow standby current (10 uA max.)\n-40 Cel to +85 Cel operation\nESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101\nLatch-up testing is done to JEDEC standard JESD78 which exceeds 100 mA\nPackages offered: SO24, SSOP24 (QSOP24), TSSOP24, HVQFN24, DHVQFN24\n;

The PCA8575 provides general purpose remote I/O expansion for most microcontroller families via the two-line bidirectional I2C-bus (serial clock (SCL), serial data (SDA)).\nThe device consists of a 16-bit quasi-bidirectional port and an I2C-bus interface. The PCA8575 has a low current consumption and includes latched outputs with high current drive capability for directly driving LEDs.\nThe PCA8575 also possesses an interrupt line (INT) which can be connected to the interrupt logic of the microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I2C-bus. The internal Power-On Reset (POR) initializes the I/Os as inputs.\n

PCA8575DB

Remote 16-bit I/O expander for I2C-bus with interrupt

Generaldescription ThePCA8575providesgeneralpurposeremoteI/Oexpansionformostmicrocontrollerfamiliesviathetwo-linebidirectionalI2C-bus(serialclock(SCL),serialdata(SDA)). Thedeviceconsistsofa16-bitquasi-bidirectionalportandanI2C-businterface.ThePCA8575hasa

PCA8575DB

Remote 16-bit I/O expander for I2C-bus with interrupt; 400 kHz I2C-bus interface\n2.3 V to 5.5 V operation with 5.5 V tolerant I/Os\n16-bit remote I/O pins that default to inputs at power-up\nLatched outputs with 25 mA sink capability for directly driving LEDs\nTotal package sink capability of 400 mA\nActive LOW open-drain interrupt output\n8 programmable slave addresses using 3 address pins\nReadable device ID (manufacturer, device type, and revision)\nLow standby current (10 uA max.)\n-40 Cel to +85 Cel operation\nESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101\nLatch-up testing is done to JEDEC standard JESD78 which exceeds 100 mA\nPackages offered: SO24, SSOP24 (QSOP24), TSSOP24, HVQFN24, DHVQFN24\n;

The PCA8575 provides general purpose remote I/O expansion for most microcontroller families via the two-line bidirectional I2C-bus (serial clock (SCL), serial data (SDA)).\nThe device consists of a 16-bit quasi-bidirectional port and an I2C-bus interface. The PCA8575 has a low current consumption and includes latched outputs with high current drive capability for directly driving LEDs.\nThe PCA8575 also possesses an interrupt line (INT) which can be connected to the interrupt logic of the microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I2C-bus. The internal Power-On Reset (POR) initializes the I/Os as inputs.\n

PCA8575DK

Remote 16-bit I/O expander for I2C-bus with interrupt

Generaldescription ThePCA8575providesgeneralpurposeremoteI/Oexpansionformostmicrocontrollerfamiliesviathetwo-linebidirectionalI2C-bus(serialclock(SCL),serialdata(SDA)). Thedeviceconsistsofa16-bitquasi-bidirectionalportandanI2C-businterface.ThePCA8575hasa

PCA8575DK

帶有中斷的I2C總線遠程16位I/O擴展器; 400 kHz I2C總線接口\n2.3 V至5.5 V 操作，5.5 V耐受I/O\n16位遠程I/O引腳在上電時默認為輸入\n閉鎖輸出具有25 mA的灌電流能力，可直接驅動LED\n總封裝灌電流能力為400 mA\n低電平有效的開漏中斷輸出\n使用3個地址引腳的8個可編程從地址\n可讀取器件ID（制造商、器件類型和版本）\n低待機電流（最大10 uA）\n-40 Cel至+85 Cel操作\nESD保護：按JESD22-A114超過2000 V HBM，按JESD22-A115超過200 V MM，按JESD22-C101超過1000 V CDM\n已按照J(rèn)EDEC標準JESD78完成閉鎖測試，超過100 mA\n提供封裝：SO24、SSOP24 (QSOP24)、TSSOP24、HVQFN24、DHVQFN24\n;

PCA8575通過兩路雙向I2C總線（串行時鐘(SCL)、串行數據(SDA)）為大多數微控制器系列提供通用遠程I/O擴展。\n器件由16位準雙向端口和I2C總線接口組成。PCA8575具有低電流消耗且包含具備高電流驅動能力的鎖存輸出，用于直接驅動LED。\nPCA8575還具有中斷線路\n，可連接至微控制器的中斷邏輯。通過在此線路發送中斷信號，遠程I/O可通知微控制器其端口上是否存在輸入數據而無需通過I2C總線通信。內部上電復位(POR)會將I/O初始化為輸入。\n