MSPM0C1103SRUKR中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Core

– Arm? 32-bit Cortex?-M0+ CPU, frequency up to

24MHz

? Operating characteristics

– Extended temperature: –40°C to 125°C

– Wide supply voltage range: 1.62 V to 3.6 V

? Memories

– Up to 16KB of flash

– 1KB of SRAM

? High-performance analog peripherals

– One analog-to-digital converter (ADC) with up

to 10 total external channels, 1.7-Msps@10-bit

or 1.5-Msps@12-bit with VDD as the voltage

reference

– Configurable 1.4-V or 2.5-V internal ADC

voltage reference (VREF)

– Integrated temperature sensor

– Integrated supply monitor

? Optimized low-power modes

– RUN: 100 μA/MHz

– STOP: 400 μA at 4 MHz and 45 μA at 32 kHz

– STANDBY: 5 μA with SRAM retention

– SHUTDOWN: 200 nA

? Intelligent digital peripherals

– 1-channel DMA controller dedicated for ADC

– Three timers supporting up to 14 PWM

channels

? One 16-bit advanced timers with deadband

support up to 8 PWM channels

? One 16-bit general purpose timer with

4 capture/compares

? One 16-bit general purpose timer with

2 capture/compares

– Windowed watchdog timer

– BEEPER generating 1/2/4/8 kHz square wave

to drive the external beeper

? Enhanced communication interfaces

– One UART interface supporting LIN, IrDA,

DALI, smart card, Manchester and low-power

operation in STANDBY mode

– One I2C interface supporting FM+ (1 Mbit/s),

SMBus, PMBus, and wakeup from STOP mode

– One SPI supporting up to 12 Mbit/s

? Clock system

– Internal 24-MHz oscillator with up to ±1

accuracy (SYSOSC)

– Internal 32-kHz low-frequency oscillator

(LFOSC)

? Data integrity

– Cyclic redundancy checker (CRC-16)

? Flexible I/O features

– Up to 18 GPIOs

– Two 5-V tolerant open-drain IOs

? Development support

– 2-pin serial wire debug (SWD)

? Package options

– 20-pin TSSOP (PW)

– 20-pin VSSOP (DGS)

– 20-pin WQFN (RUK)

– 16-pin SOT (DYY)

– 8-pin SOT (DDF)

– 8-pin WSON (DSG)

? Family members (also see Device Comparison)

– MSPS003F4: 16KB of flash, 1KB of RAM

– MSPS003F3: 8KB of flash, 1KB of RAM

– MSPM0C1104: 16KB of flash, 1KB of RAM

– MSPM0C1103: 8KB of flash, 1KB of RAM

? Development kits and software (also see Tools

and Software)

– LP-MSPM0C1104 LaunchPad? development

kit

– MSP Software Development Kit (SDK)

2 Applications

? Battery charging and management

? Power supplies and power delivery

? Personal electronics

? Building security and fire safety

? Connected peripherals and printers

? Grid infrastructure

? Smart metering

? Communication modules

? Medical and healthcare

? Lighting

3 Description

MSPM0C110x microcontrollers (MCUs) are part of the MSP highly-integrated ultra-low-power 32-bit MCU family

based on the enhanced Arm? Cortex?-M0+ core platform operating at up to 24-MHz frequency. These costoptimized

MCUs offer high-performance analog peripheral integration, support extended temperature ranges

from -40°C to 125°C, and operate with supply voltages from 1.62 V to 3.6 V.

The MSPM0C110x devices provide up to 16KB embedded flash program memory with 1KB SRAM. These

MCUs incorporate a high-speed on-chip oscillator with an accuracy up to ±1, eliminating the need for

an external crystal. Additional features include a 1-channel DMA, CRC-16 accelerator, and a variety of highperformance

analog peripherals such as one 12-bit 1.5-Msps ADC with VDD as the voltage reference, and an

on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced

timer, two 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication

peripherals including one UART, one SPI, and one I2C. These communication peripherals offer protocol support

for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital

integration let customers find the MCU that meets their project needs. The architecture combined with extensive

low-power modes is optimized to achieve extended battery life in portable measurement applications.

MSPM0C110x MCUs are supported by an extensive hardware and software ecosystem with reference designs

and code examples to get the design started quickly. Development kits include a LaunchPad? kit available for

purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit

(SDK), which is available as a component of Code Composer Studio? IDE desktop and cloud version within

the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP

Academy, and online support through the TI E2E? support forums.

For complete module descriptions, see the MSPM0C-Series 24-MHz Microcontrollers Technical Reference

Manual.