MSP430F415

具有 16KB 閃存、512B SRAM、計(jì)時(shí)器、比較器和 96 段 LCD 的 8MHz MCU; ? Low Supply-Voltage Range, 1.8 V to 3.6 V\n? Ultralow-Power Consumption: \n? Active Mode: 200 μA at 1 MHz, 2.2 V\n? Standby Mode: 0.7 μA\n? Off Mode (RAM Retention): 0.1 μA\n \n? Five Power-Saving Modes\n? Wake-Up From Standby Mode in Less Than 6 μs\n? Frequency-Locked Loop, FLL+\n? 16-Bit RISC Architecture, 125-ns Instruction Cycle Time\n? 16-Bit Timer_A With Three or Five Capture/Compare Registers\n? Integrated LCD Driver for 96 Segments\n? On-Chip Comparator\n? Brownout Detector\n? Supply Voltage Supervisor/Monitor - Programmable Level Detection on MSP430F415/417 Devices Only\n? Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse\n? Bootstrap Loader in Flash Devices\n? Family Members Include: \n? MSP430C412: 4KB ROM, 256B RAM\n? MSP430C413: 8KB ROM, 256B RAM\n? MSP430F412: 4KB + 256B Flash, 256B RAM\n? MSP430F413: 8KB + 256B Flash, 256B RAM\n? MSP430F415: 16KB + 256B Flash 512B RAM\n? MSP430F417: 32KB + 256B Flash 1KB RAM\n \n? Available in 64-Pin Quad Flat Pack (QFP) and 64-pin QFN\n? For Complete Module Descriptions, Refer to the MSP430x4xx Family User’s Guide, Literature Number SLAU056\n Timer_A5 in ’F415 and ’F417 devices only;

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 μs. The MSP430x41x series are microcontroller configurations with one or two built-in 16-bit timers, a comparator, 96 LCD segment drive capability, and 48 I/O pins. Typical applications include sensor systems that capture analog signals, convert them to digital values, and process the data and transmit them to a host system. The comparator and timer make the configurations ideal for industrial meters, counter applications, handheld meters, etc.

MSP430F415

MIXED SIGNAL MICROCONTROLLER

MSP430F415

ULTRA-LOW-POWER MICROCONTROLLERS

MSP430F4152

具有 16KB 閃存、512B SRAM、10 位 ADC、I2C/SPI/UART、比較器和 144 段 LCD 的 8MHz MCU; ? Low Supply-Voltage Range, 1.8 V to 3.6 V\n? Ultralow Power Consumption Active Mode: 220 μA at 1 MHz, 2.2 V Standby Mode: 0.9 μA Off Mode (RAM Retention): 0.1 μA\n? Five Power-Saving Modes\n? Wake-Up From Standby Mode in Less Than 6 μs \n? Internal Very Low Power, Low-Frequency Oscillator\n \n? 16-Bit RISC Architecture, 125-ns Instruction Cycle Time\n? 16-Bit Timer_A With Three Capture/Compare Registers\n? 16-Bit Timer_A With Five Capture/Compare Registers\n? Two Universal Serial Communication Interfaces (USCIs) \n? USCI_A0 \n? Enhanced UART Supporting Auto-Baudrate Detection\n? IrDA Encoder and Decoder\n? Synchronous SPI\n \n? USCI_B0 \n? I2C\n? Synchronous SPI\n \n \n? Supply Voltage Supervisor/Monitor With Programmable Level Detection\n? Integrated LCD Driver With Contrast Control for Up to 144 Segments\n? Basic Timer With Real Time Clock Feature\n? Brownout detector\n? On-Chip Comparator for Analog Signal Compare Function or Slope A/D\n? 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer Controller\n? Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse\n? Bootstrap Loader\n? On-Chip Emulation Module\n? Family Members Include: \n? MSP430F4152: 16KB+256B Flash Memory 512B RAM\n? MSP430F4132: 8KB+256B Flash Memory 512B RAM\n \n? Available in 64-Pin QFP Package and 48-Pin QFN Package (See Available Options)\n? For Complete Module Descriptions, See The MSP430x4xx Family User’s Guide, Literature Number SLAU056;

The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes, is optimized to achieve extended battery life in portablemeasurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generator that contribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 μs.\n\n TheMSP430F41x2 is a microcontroller configurationwith two 16-bit timers, a basic timerwith a real-time clock, a 10-bit A/D converter, a versatile analog comparator, two universal serial communication interfaces, up to 48 I/O pins, and a liquid crystal display driver.\n\n Typical applications for this device include analog and digital sensor systems, remote controls, thermostats, digital timers, hand-held meters, etc.

MSP430F4152

ULTRA-LOW-POWER MICROCONTROLLERS

MSP430F4152IPM

MIXED SIGNAL MICROCONTROLLER

MSP430F4152IPM

MIXED SIGNAL MICROCONTROLLER

MSP430F4152IPMR

MIXED SIGNAL MICROCONTROLLER

MSP430F4152IPMR

MIXED SIGNAL MICROCONTROLLER

MSP430F4152IRGZ

MIXED SIGNAL MICROCONTROLLER