MPL115A2

12C VERSION; ? Digitized pressure and temperature information together with programmed calibration coefficients for host micro use\n? Factory calibrated\n? 50 kPa to 115 kPa absolute pressure\n? 1 kPa accuracy\n? 2.375 to 5.5-volt supply\n? Integrated ADC\n? SPI or I2C Interface\n? Monotonic pressure and temperature data outputs\n? Surface mount RoHS compliant package\n;

The MPL115A is a simple barometer with digital output for cost-effective applications. It employs a MEMS pressure sensor with a conditioning integrated circuit to provide accurate pressure data. An integrated analog-to-digital converter (ADC) provides digitized temperature and pressure sensor outputs via?either a serial peripheral interface (SPI) (MPL115A1) or I2C (MPL115A2) port. Calibration data is housed in on-board ROM, is used by the host microcontroller to apply compensation algorithms to the raw sensor data and may be accessed at any time. Calibration data is typically accessed when the host micro first enables the sensor. The MPL115A1 operates as a SPI slave with bus speeds up to 8 Mbps. The MPL115A2 operates as a I2C slave capable of bus speeds up to 400 Kbps (fast mode).?Both versions are offered in a 5.0 mm x 3.0 mm x 1.2 mm max LGA package and?are specified for operation from -40oC to 105oC. All packages are surface mount and RoHs compliant.\n

MPL115A2

Miniature I2C Digital Barometer

MPL115A2

Miniature I2C Digital Barometer

MPL115A2

Miniature I2C Digital Barometer

MPL115A2_10

Miniature I2C Digital Barometer

MPL115A2_13

Miniature I2C Digital Barometer

MPL115A2S

絕對數字壓力傳感器（50至115千帕）;

MPL115A2T1

Miniature I2C Digital Barometer

MPL115A2T1

Miniature I2C Digital Barometer

MPL115A2T1

Miniature I2C Digital Barometer