MPL015A2中文資料飛思卡爾數(shù)據(jù)手冊PDF規(guī)格書

The MPL015A2 is an absolute pressure sensor with digital output for low cost applications. A miniature 5 x 3 x 1.2 mm LGA package ideally suits it for portable electronics and space constrained applications. Low current consumptions of 5 μA during Active mode and 0.06 μA during Shutdown (Sleep) mode target battery and other low-power applications. A wide operating temperature range from -40°C to +105°C fits demanding environmental requirements.

MPL015A2 employs a MEMS pressure sensor with a conditioning IC to provide accurate pressure measurement from 50 to 115 kPa. An integrated ADC provides digitized temperature and pressure sensor outputs via an I2C port. Calibration Data is stored in internal ROM. Utilizing raw sensor output, the host microcontroller executes a compensation algorithm to render Compensated Absolute Pressure.

The MPL015A2 pressure sensor’s small form factor, low power capability, precision, and digital output optimize it for barometric measurement applications.

Features

? Digitized pressure and temperature information together with programmed calibration coefficients for host micro use.

? Factory Calibrated

? 50 kPa to 115 kPa Absolute Pressure

? 1 kPa Accuracy

? 2.375 V to 5.5 V Supply

? Integrated ADC

? I2C Interface

? Monotonic Pressure and Temperature Data Outputs

? Surface Mount RoHS Compliant Package

Application Examples

? Barometry (portable and desk-top)

? Altimeters

? Weather Stations

? Hard Disk-Drives (HDD)

? Industrial Equipment

? Health Monitoring

? Air Control Systems