MPC8544VTARJ

PowerQUICC??III Integrated Processor Hardware Specifications

MPC8544EOverview Thissectionprovidesahigh-leveloverviewofMPC8544Efeatures.Figure1showsthemajorfunctionalunitswithinthedevice. KeyFeatures Thefollowinglistprovidesanoverviewofthedevicefeatureset: ?High-performance,32-bitcoreenhancedbyresourcesforembeddedco

MPC8544VTARJA

PowerQUICC, 32 Bit Power Arch SoC, 1067MHz, DDR1/2, PCI/PCIe, 1GbE, USB, 0 to 105C, Rev 2.1; ? Embedded e500 core, initial offerings from 667 MHz up to 1.067 GHz ? Dual dispatch superscalar, 7-stage pipeline design with out-of-order issue and execution\n? 2,240 MIPS at 1.0 GHz (estimated Dhrystone 2.1)\n? 36-bit physical addressing\n? Integrated L1/L2 cache ? L1 cache—32 KB data and 32 KB instruction cache with line-locking support\n? L2 cache—256 KB (8-way set associative); 256/128/64/32 KB can be used as SRAM\n? L1 and L2 hardware coherency\n? L2 cache and I/O transactions can be stashed into L2 cache regions\n? Integrated DDR memory controller with full ECC support, offering: ? 200 MHz clock rate (400 MHz data rate), 64-bit, 2.5V/2.6V I/O, DDR SDRAM\n? 267 MHz clock rate (up to 533 MHz data rate), 64-bit, 1.8V I/O, DDR2 SDRAM\n? Integrated security engine supporting DES, 3DES, MD-5, SHA-1/2, AES, RSA, RNG, Kasumi F8/F9 and ARC-4 encryption algorithms (MPC8544E)\n? Two on-chip enhanced triple speed Ethernet controllers (ETSECs) supporting 10 Mbps, 100 Mbps and 1 Gbps Ethernet/IEEE? 802.3 networks with MII, RMII, GMII, RGMII TBI and RTBI physical interfaces as well as SGMII interfaces through a dedicated SerDes. ? TCP/UDP/IP checksum acceleration\n? Advanced QoS features\n? Enhanced hardware and software debug support\n? Double-precision embedded scalar and vector floating-point APUs\n? Memory management unit (MMU)\n? PCI Express high-speed interconnect interfaces, supporting combinations of dual x4 and single x1 PCI Express\n? On-chip network switch fabric\n? PCI interface support ? 32-bit PCI 2.2 bus controller (up to 66 MHz, 3.3V I/O)\n? Local bus ? 133 MHz, 32-bit, 3.3V I/O, local bus with memory controller\n? Integrated four-channel DMA controller\n? Dual I2C and DUART support\n? Programmable interrupt controller (PIC)\n? IEEE 1149.1 JTAG test access port\n? 1.0V core voltage with 3.3V and 2.5V I/O\n? 783-pin FC-PBGA package\n? Operating junction temperature range: TJ = 0o to +105oC, Extended temperature range: TJ = -40o to +105oC\n? This product is included in NXP?.s product longevity program, with assured supply for a minimum of 10 years after launch\n;

The MPC8544E PowerQUICC? III is designed to offer the unique combination of high performance, exceptional integration and lower overall power consumption required for networking, communications and industrial control applications.\nThe MPC8544E includes a high-performance e500 processor core built on Power Architecture? technology, enhanced peripherals and high-speed interconnect technology to balance processor performance with I/O system throughput enabling clock speeds scaling from 667 MHz up to 1.067 GHz. Third-generation PowerQUICC III processors are based on NXP?.s 90 nanometer (nm) silicon-on-insulator (SOI) copper interconnect process technology, which is designed to enable the processors to deliver higher performance with lower power dissipation.\nThe MPC8544E processor offers a wide range of high-speed connectivity options, including Gigabit Ethernet (GbE) interfaces with SGMII support and multiple PCI Express? connections. Support for these high-speed interfaces should enable scalable connectivity to network processors and/or ASICs in the data plane while the PowerQUICC III is designed to handle complex, computationally demanding control plane processing tasks. The MPC8544E is also designed to provide support for legacy PowerQUICC III interfaces such as PCI, I2C, dual universal asynchronous receiver/transmitters (DUART) and local bus connections. These processors are also designed to feature a next-generation double data rate (DDR2) memory controller, enhanced GbE support, v2 e500 double precision floating point and the field proven 90 nm PowerQUICC III integrated security engines.\nKey Advantages\nHigh level of integration and performance\nConsistent programming model across the PowerQUICC III family\nFlexible SoC platform for fast time to market\nSimplified board design\nLarge L2 cache at 256 KB\nHigh internal processing bandwidth\nIntegrated DDR and DDR2 memory controller\nTwo integrated Ethernet controllers (enhanced TSEC) with SGMII support\nLarge L2 cache at 256 KB\nFlexible high-speed interconnection interfaces/multiple PCI Express connections\n32-bit PCI support\nIntegrated security engine\nAccess to the errata document for this device requires an NDA. Contact your local NXP Sales Office or NXP Authorized Distributor.\n

恩XP

PCD8544

48x84pixelsmatrixLCDcontroller/driver

GENERALDESCRIPTION ThePCD8544isalowpowerCMOSLCDcontroller/driver,designedtodriveagraphicdisplayof48rowsand84columns.Allnecessaryfunctionsforthedisplayareprovidedinasinglechip,includingon-chipgenerationofLCDsupplyandbiasvoltages,resultinginaminimumo

PHI

PCD8544U

48x84pixelsmatrixLCDcontroller/driver

GENERALDESCRIPTION ThePCD8544isalowpowerCMOSLCDcontroller/driver,designedtodriveagraphicdisplayof48rowsand84columns.Allnecessaryfunctionsforthedisplayareprovidedinasinglechip,includingon-chipgenerationofLCDsupplyandbiasvoltages,resultinginaminimumo

PHI

PN8544

MSDPro-BilletChryslerV8Distributor

PTLV8544PWT

500nARRIONanopowerOperationalAmplifierforCost-OptimizedSystems

SGM8544

CMOSOperationalAmplifiers

SGM8544

CMOSOperationalAmplifiers

SGM8544

CMOSOperationalAmplifiers

SGM8544

1.1MHz,42關(guān)A,Rail-to-RailI/OCMOSOperationalAmplifier

PRODUCTDESCRIPTION TheSGM8541(single),SGM8542(dual)andSGM8544(quad)arelowcost,rail-to-railinputandoutputvoltagefeedbackamplifiers.Theyhaveawideinputcommonmodevoltagerangeandoutputvoltageswing,andtaketheminimumoperatingsupplyvoltagedownto2.1V.Themaximumr