MPC8321VRADDC

PowerQUICC, 32 Bit Power Architecture SoC, 266MHz e300, QE, PCI, USB2.0, DDR1/2, UART, 0-105C; ? ?e300 core with dual integer units enables more efficient operations to be conducted in parallel, resulting in significant performance improvement.;

The MPC8321E PowerQUICC?. II Pro is a member of the MPC8323E family of cost-effective network communications processosr that meet the requirements of several small office/home office (SOHO), access, IP services and industrial control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC? II processors while addressing important time to market, price, power consumption and board real estate requirements\nCore ComplexThe MPC8321E incorporates a unique configuration of the e300c2 (MPC603e-based) core. While this version of e300 core does not have a Floating-Point Unit (FPU) it has been designed to include dual integer units as well as a modified multiply instruction. These architectural enhancements enable more efficient operations to be executed in parallel, resulting in significant performance improvement. The core also includes 16 Kbytes of L1 instruction and data caches and on-chip memory management units (MMUs). The MPC8321E also includes a 32-bit PCI controller, four DMA channels, a flexible local bus, and a 32-bit DDR-1/DDR-2 SDRAM memory controller..\nQUICC Engine? TechnologyA new single-RISC version of the QUICC Engine? communications engine forms the heart of the networking capability of the MPC8321E. The QUICC Engine? block contains several peripheral controllers and a single 32-bit reduced instruction set computing (RISC) controller. Unique microcode packages provide support for NAT, Firewall, IPSec, and Advanced Quality of Service (QoS). Protocol support is provided by the main workhorses of the device - the unified communication controllers (UCCs). Each of the five UCCs can support a variety of communication protocols:\n?Up to (3) 10/100 Mbps Ethernet\n?High-level data link control (HDLC)\n?Up to (4) Time division multiplexing (TDM)\n?Binary synchronous communications protocol (BISYNC)\n?UCC can also support USB 2.0 (full/low speed)\nHardware Security EngineThe security engine (SEC 2.2) on the MPC8321E allows CPU-intensive cryptographic operations to be off-loaded from the main CPU core. The security-processing accelerator provides hardware acceleration for DES, 3DES, Advanced Encryption Standard (AES), Secure Hash Algorithm (SHA)-1 and MD-5 algorithms.\nSystem Interface UnitThe MPC8321E family also includes a 32-bit double data rate (DDR)-1/DDR/2 memory controller, a 32-bit peripheral component interconnect (PCI) controller, a 16-bit local bus and four direct memory access (DMA) channels.\nTypical Applications\n?Residential gateways\n?SOHO networking\n?VPN routers\n?Access points\n?DSLAM line cards\n?Industrial control\n?Test and measurement equipment\n

恩XP

MPC8321VRADDC

PowerQUICC II Pro Integrated Communications Processor Family Hardware Specifications

MPC8321VRADDCA

PowerQUICC, 32 Bit Power Architecture SoC, 266MHz e300, QE, PCI, USB2.0, DDR1/2, UART, 0-105C; ? e300 core with dual integer units enables more efficient operations to be conducted in parallel, resulting in significant performance improvement\n? The single-RISC QUICC Engine? communications block offers a future-proof solution for next-generation designs by supporting programmable protocol termination and network interface termination to meet evolving protocol standards\n? DDR-1/DDR-2 memory controller—one 32-bit interface operating at up to 266 MHz supporting both DDR-1 and DDR-2\n? Peripheral interfaces such as 32-bit, 66 MHz PCI, 16-bit, 66 MHz local bus interface and USB 2.0 (full/low-speed)\n? High degree of software compatibility with previous-generation PowerQUICC? processor-based designs for backward compatibility and easier software migration\n? This product is included in NXP?.s product longevity program, with assured supply for a minimum of 10 years after launch\n;

The MPC8321 PowerQUICC? II Pro is part of the MPC8323E family of cost-effective network communication processors that meet the requirements of several small office/home office (SOHO), broadband access, routers and industrial control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC processors while addressing important time to market, price, power consumption and board real estate requirements.\nCore ComplexThe MPC8321 incorporates a unique configuration of the e300c2 (MPC603e-based) core. While this version of e300 core does not have a floating point unit (FPU), it has been designed to include dual integer units as well as a modified multiply instruction. These architectural enhancements enable more efficient operations to be executed in parallel, resulting in significant performance improvement. The core also includes 16 KB of L1 instruction and data caches and on-chip memory management units (MMUs). The MPC8321 includes a 32-bit PCI controller, four DMA channels, a flexible local bus and a 32-bit DDR-1/DDR-2 SDRAM memory controller.\nQUICC Engine? TechnologyA new single-reduced instruction set computing (RISC) version of the QUICC Engine communications engine forms the heart of the networking capability of the MPC8321. The QUICC Engine block contains several peripheral controllers and a single 32-bit RISC controller. Unique microcode packages provide support for network address port translation (NAPT), firewall, IPsec and advanced quality of service (QoS). Protocol support is provided by the main workhorses of the device—the unified communication controllers (UCCs). Each of the five UCCs can support a variety of communication protocols:\nUp to three 10/100 Mbps Ethernet\nHigh-level data link control (HDLC)\nUp to four time division multiplexing (TDM)\nBinary synchronous communications protocol (BISYNC)\nUCC can also support USB 2.0 (full/low-speed)\nSystem Interface UnitThe MPC8321 family also includes a 32-bit double data rate (DDR)-1/DDR/2 memory controller, a 32-bit peripheral component interconnect (PCI) controller, a 16-bit local bus and four direct memory access (DMA) channels.\n

恩XP

MPC8321ZQADDC

SingleplatformarchitecturesupportstheconvergenceofIPpacketnetworksandATMnetworks.

NDH8321C

DualN&P-ChannelEnhancementModeFieldEffectTransistor

GeneralDescription ThesedualN-andP-ChannelenhancementmodepowerfieldeffecttransistorsareproducedusingFairchildsproprietary,highcelldensity,DMOStechnology.Thisveryhighdensityprocessisespeciallytailoredtominimizeon-stateresistanceandprovidesuperiorswitchingperf

PE8321

50OhmSMAIsolatorOperatingFrom135MHzto175MHzAnd150WattsWith20dBIsolation

S8321

18watt;pin-basedCompactFluorescent;2700K;82CRI;G24d-2base

S-8321

SMALLPACKAGEPFMCONTROLSTEP-UPSWITCHINGREGULATOR

S-8321A

SMALLPACKAGEPFMCONTROLSTEP-UPSWITCHINGREGULATOR

S-8321B

SMALLPACKAGEPFMCONTROLSTEP-UPSWITCHINGREGULATOR