MIW10-12D12

10W 2:1 Regulated DC/DC Converter ±12V Dual Output DIP-24; ? ? 工業標準DIP-24包裝\n\n? 2:1寬輸入電壓范圍\n\n? 全穩壓輸出\n\n? 隔離耐壓1500VDC\n\n? 工作環境溫度范圍：-40℃至+85℃\n\n? 低空載功耗\n\n? 無需最小負載\n\n? 具備輸入低電壓、輸出過電流、輸出短路保護機制\n\n? 具備遙控開關功能\n\n? 屏蔽式金屬外殼與絕緣基板\n\n? 符合國際安規UL/cUL/IEC/EN 62368-1(60950-1)認證\n\n\n\n;

The MINMAX MIW10 series is a range of cost-optimized 10W isolated DC-DC converter within an encapsulated DIP-24 package. There are 21 modelsavailable for 12, 24, 48VDC with wide 2:1 input voltage range. By state-of-the-art circuit topology and 89% high efficiency could be achieved allowing anoperating temperature of -40℃ to +85℃ as well as low standby power comsumption. Further features include remote ON/OFF, under-voltage, overload,short circuit protection and no min. load requirement as well. These DC-DC converters offer a better solution for critical space applications to reduce PCBlayout demand area like battery-powered equipment, instrumentation, distributed power architectures in communication, industrial electronics, energyfacilities and others.

MIW10-12D12M

DC-DC 電源轉換器; ? \n\n? 工業標準DIP-24包裝\n\n? 2:1寬輸入電壓范圍\n\n? 全穩壓輸出\n\n? 加強型絕緣，隔離耐壓5000VAC，額定工作電壓250Vrms\n\n? 沿面距離與空間距離達8mm\n\n? 低漏電流\n\n? 工作環境溫度范圍：-40 ℃至90 ℃\n\n? 無需最小負載\n\n? 具備輸入低電壓、輸出過電流、輸出過電壓、輸出短路保護機制\n\n? 內含傳導性電磁干擾(EMI)濾波電路，并通過EN55011 Class A 認證\n\n? 通過第四版醫療EMC標準EMI EN55011 & EMS EN60601-1-2\n\n? 通過第三版醫療安規IEC/EN 60601-1 & ANSI/AAMI ES60601-1(2×MOPP)認證與CE標志\n\n;

The MINMAX MIW10M series is a new range of high performance 10W medical approved DC-DC converter within encapsulated DIP-24 package whichspecifically design for medical applications. There are 24 models available for input voltage of 12, 24, 48VDC with wide 2:1 input range and fixed outputvoltage. The I/O isolation is specified for 5000VAC with reinforced insulation, which rated for 250Vrms working voltage. Further features includeunder-voltage, overload, over voltage, short circuit protection, no min. load requirement, EMI emission EN 55011 class A approved, low leakage current 2μAmax. and operating ambient temp. range by -40℃ to 90℃ without derating by high efficiency up to 89%. MIW10M series conform to 4th edition medicalEMC standard, medical safety with 2xMOPP (Means Of Patient Protection) per 3rd edition of IEC/EN 60601-1 & ANSI/AAMI ES 60601-1 approved and8mm creepage and clearance. The MIW10M series offer the best solution for demanding applications in medical instrument requesting a certifiedsupplementary and reinforced insulation system to comply with latest medical safety approval for 2xMOPP requirement.

MKW10-12D12M

Insulationratedfor300VACWorkingVoltage

MKW10-12D12M

DC/DCCONVERTER10W,ReinforcedInsulation,MedicalSafety

MOP10-12D12A

DC-DCCONVERTER

MOP10-12D12A

DC-DCCONVERTER

MPP10-12D12A/B

DC-DCCONVERTER

MPP10-12D12AB

REINFORCEDINSULATIONFOR250VACWORKINGVOLTAGE

MPP10-12D12ASLASHB

DC-DCCONVERTER

NFC10-12D12

Singleanddualoutput10WattWideinputDC/DCconverters