MCP1416

Tiny 1.5 A MOSFET Gate Driver; Latch-up Immunity: Highly Resistant to Ground Bounce and Negative Input Thresholds\nMatched Rise and Fall Times and Matched Propagation Delay Times\nInput Will Withstand Negative Swings of Up to 5 V\nHigh Peak Output Source/Sink Current: 1.5 A typically\n470 pF in 10.0 ns (typ)\n1000 pF in 20.0 ns (typ)\nWide Operating Range: 4.5 V to 18 V\nLow Output Impedance\n850 μA (With Logic “1” Input)\n100 μA (With Logic “0” Input)\nCan Withstand Up to 0.5 A of Output Reverse Current\nESD Protected: 4 kV\nLow Shoot-Through / Cross-Conduction Current in Output Stage\nImmune to Double Pulsing the Output with Slow Ramping Input Signals\nPackaging: 5 Lead SOT-23;

The MCP1415/16 devices are small(Tiny) footprint Low-Side MOSFET gate drivers capable of supplying 1.5 A peak output current in a SOT23 5L package. The MCP1415 is an inverting low side driver meaning that when the input signal is high, the output is low. The MCP1416 is a non-inverting low side driver meaning that when the input signal is high, the output signal is also high. Although the name of the device is MOSFET gate driver, these devices have other applications besides driving the gate of a MOSFET. These devices are also used to direct drive a small DC motor, act as buffers for high speed data lines, and level translators to interface low voltage to high voltage.

MCP1416

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416RT

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416RT-E

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416RT-E/OT

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416RT-ESLASHOT

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416RT-OT

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416T

Tiny 1.5A, High-Speed Power MOSFET Driver

MCP1416T-E

Tiny 1.5A, High-Speed Power MOSFET Driver