MC74HC4060ADT集成電路（IC）的計數器除法器規格書PDF中文資料

MC74HC4060ADT屬于集成電路（IC）的計數器除法器。由安森美半導體公司制造生產的MC74HC4060ADT計數器，除法器計數器和除法器 IC 是數字邏輯器件，可對輸入發生的邏輯轉換進行計數，然后使用多個并行輸出重新發送累加的計數，和/或生成單個輸出信號轉換，從而對應用某些整數數量輸入信號轉換進行響應。除了簡單的事件計數，它們還可用于各種頻率合成應用。

14?Stage Binary Ripple Counter With Oscillator

High–Performance Silicon–Gate CMOS

The MC74HC4060A is identical in pinout to the standard CMOS MC14060B. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL

outputs.

This device consists of 14 master?slave flip?flops and an oscillator with a frequency that is controlled either by a crystal or by an RC circuit connected externally. The output of each flip?flop feeds the next and the frequency at each output is half of that of the preceding one. The state of the counter advances on the negative?going edge of the Osc In. The active?high Reset is asynchronous and disables the oscillator to allow very low power consumption during stand?by

operation.

State changes of the Q outputs do not occur simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and may have to be gated with Osc Out 2 of the HC4060A.

Features

? Output Drive Capability: 10 LSTTL Loads

? Outputs Directly Interface to CMOS, NMOS, and TTL

? Operating Voltage Range: 2.0 to 6.0 V

? Low Input Current: 1 μA

? High Noise Immunity Characteristic of CMOS Devices

? In Compliance With JEDEC Standard No. 7A Requirements

? Chip Complexity: 390 FETs or 97.5 Equivalent Gates

? Pb?Free Packages are Available*