MC68HC11A0中文資料飛思卡爾數據手冊PDF規格書

Introduction

The MC68HC11A8, MC68HC11A1, and MC68HC11A0 high-performance microcontroller units (MCUs) are based on the M68HC11 Family. These high speed, low power consumption chips have multiplexed buses and a fully static design. The chips can operate at frequencies from 3 MHz to dc. The three MCUs are created from the same masks; the only differences are the value stored in the CONFIG register, and whether or not the ROM or EEPROM is tested and guaranteed.

Features

? M68HC11 CPU

? Power Saving STOP and WAIT Modes

? 8 Kbytes ROM

? 512 Bytes of On-Chip EEPROM

? 256 Bytes of On-Chip RAM (All Saved During Standby)

? 16-Bit Timer System

— 3 Input Capture Channels

— 5 Output Compare Channels

? 8-Bit Pulse Accumulator

? Real-Time Interrupt Circuit

? Computer Operating Properly (COP) Watchdog System

? Synchronous Serial Peripheral Interface (SPI)

? Asynchronous Nonreturn to Zero (NRZ) Serial Communications Interface (SCI)

? 8-Channel, 8-Bit Analog-to-Digital (A/D) Converter

? 38 General-Purpose Input/Output (I/O) Pins

— 15 Bidirectional I/O Pins

— 11 Input-Only Pins and 12 Output-Only Pins (Eight Output-Only Pins in 48-Pin Package)

? Available in 48-Pin Dual In-Line Package (DIP) or 52-Pin Plastic Leaded Chip Carrier (PLCC)