MC34652R2中文資料飛思卡爾數(shù)據(jù)手冊PDF規(guī)格書

2.0 A Negative Voltage Hot Swap Controller with Enhanced Programmability

The 34652 is a highly integrated -48 V hot swap controller with an internal Power MOSFET. It provides the means to safely install and remove boards from live -48 V backplanes without having to power down the entire system. It regulates the inrush current, from the supply to the load’s filter capacitor, to a user-programmable limit, allowing the system to safely stabilize. A disable function allows the user to disable the 34652 manually or through a microprocessor and safely disconnect the load from the main power line.

The 34652 has active high and active low power good output signals that can be used to directly enable a power module load. Programmable under- and overvoltage detection circuitry monitors the input voltage to check that it is within its operating range. A programmable start-up delay timer ensures that it is safe to turn on the Power MOSFET and charge the load capacitor.

A two-level current limit approach to controlling the inrush current and switching on the load limits the peak power dissipation in the Power MOSFET. Both current limits are user programmable.

Features

? Integrated Power MOSFET and Control IC in a Small Outline Package

? Input Voltage Operation Range from -15 V to -80 V

? Programmable Overcurrent Limit with Auto Retry

? Programmable Charging Current Limit Independent of Load Capacitor

? Programmable Start-Up and Retry Delay Timer

? Programmable Overvoltage and Undervoltage Detection

? Active High and Low Power Good Output Signals

? Thermal Shutdown

? Pb-Free Packaging Designated by Suffix Code EF