MAX3232E-Q1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Qualified for automotive applications

? Meets or exceeds the requirements of TIA/

EIA-232-F and ITU v.28 standards

? Operates with 3V to 5.5V VCC supply

? Operates up to 250kbit/s

? Two drivers and two receivers

? Low standby current: 300μA Typical

? External capacitors: 4 × 0.1μF

? Accepts 5V logic input with 3.3V supply

? Pin compatible to alternative high-speed pincompatible

device (1Mbit/s): SNx5C3232

2 Applications

? Industrial PCs

? Wired networking

? Data center and enterprise computing

? Battery-powered systems

? Notebooks

? Palmtop PCs

? Hand-held equipment

3 Description

The MAX3232E device consists of two line drivers,

two line receivers, and a dual charge-pump

circuit with ±15kV IEC ESD protection pin to pin

(serial-port connection pins, including GND). The

device meets the requirements of TIA/EIA-232-F

and provides the electrical interface between an

asynchronous communication controller and the

serial-port connector. The charge pump and four small

external capacitors allow operation from a single 3V

to 5.5V supply. The device operates at data signaling

rates up to 250kbit/s and a maximum of 30V/μs driver

output slew rate.