MAX116CAX集成電路（IC）的模數(shù)轉(zhuǎn)換器（ADC）規(guī)格書PDF中文資料

General Description

The MAX115/MAX116 are high-speed, multichannel, 12-bit data-acquisition systems (DAS) with simultaneous track/holds (T/Hs). These devices contain a 12-bit, 2μs, successive-approximation analog-to-digital converter (ADC), a +2.5V reference, a buffered reference input, and a bank of four simultaneous-sampling T/H amplifiers that preserve the relative phase information of the sampled inputs. The MAX115/MAX116 have two multiplexed inputs for each T/H, allowing a total of eight inputs. In addition, the converter is overvoltage tolerant to ±17V. A fault condition on any channel will not damage the IC. Available input ranges are ±5V (MAX115) and ±2.5V (MAX116).

Features

?Four Simultaneous-Sampling T/H Amplifiers with Two Multiplexed Inputs (Eight Single-Ended Inputs Total)

?2μs Conversion Time per Channel

?Throughput: 390ksps (1 Channel)

? 218ksps (2 Channels)

? 152ksps (3 Channels)

? 116ksps (4 Channels)

?Input Range: ± 5V (MAX115)

?????????????????? ± 2.5V (MAX116)

?Fault-Protected Input Multiplexer (±17V)

?Internal +2.5V or External Reference Operation

?Programmable On-Board Sequencer

?High-Speed Parallel DSP Interface

?Internal 10MHz Clock

Applications

Multiphase Motor Control

Power-Grid Synchronization

Power-Factor Monitoring

Digital Signal Processing

Vibration and Waveform Analysis