LPC3141FET180

Arm926EJ-S?，具備192 kB SRAM、高速USB OTG、SD/MMC以及NAND閃存控制器; 270 MHz, 32-bit ARM926EJ-S\n16 kB D-cache and 16 kB I-cache\nMemory Management Unit (MMU)\n192 kB embedded SRAM\n8/16-bit Multi-Port Memory Controller (MPMC): SDRAM and SRAM\nHigh-speed USB 2.0 (OTG, Host, Device) with on-chip PHY\nTwo I2S interfaces\nIntegrated master/slave SPI\nTwo master/slave I2C-bus interfaces\nFast UART\nMemory Card Interface (MCI): MMC/SD/SDIO/CE-ATA\nFour-channel 10-bit ADC\nIntegrated 4/8/16-bit 6800/8080 compatible LCD interface\nDynamic clock gating and scaling\nMultiple power domains\nSelectable boot-up: SPI flash, NAND flash, SD/MMC cards, UART, or USB\nDMA controller\nFour 32-bit timers\nWatchdog timer\nPWM module\nMaster/slave PCM interface\nRandom Number Generator (RNG)\nGeneral Purpose I/O pins (GPIO)\nFlexible and versatile interrupt structure\nJTAG interface with boundary scan and Arm? debug access\nCore voltage: 1.2 V\nI/O voltages: 1.8 V, 3.3 V\n;

The NXP LPC3141 combine a 270 MHz ARM926EJ-S CPU core, High-speed USB 2.0 OTG, 192 kB SRAM, NAND flash controller, flexible external bus interface, four channel 10-bit A/D, and a myriad of serial and parallel interfaces in a single chip targeted at consumer, industrial, medical, and communication markets. To optimize system power consumption, the LPC3141 have multiple power domains and a very flexible Clock \n

恩XP

LPC3250FET296

LPC
BGA

LPC

LPC4320FBD144551

TI

LPC4330FBD144

NXP
QFP

恩XP

LPC4330FET180Y

TI