DRV8834

具有 1/32 微步進分度器的 11V、1.5A、雙路 H 橋或步進電機驅動器; ? Dual-H-Bridge Current-Control Motor Driver \n? Capable of Driving Two DC Motors or One Stepper Motor\n \n? Two Control Modes: \n? Built-In Indexer Logic With Simple STEP/DIRECTION Control and Up to 1/32-Step Microstepping\n? PHASE/ENABLE Control, With the Ability to Drive External References for > 1/32-Step Microstepping\n \n? Output Current 1.5-A Continuous, 2.2-A Peak per H-Bridge (at VM = 5 V, 25°C)\n? Low RDS(ON): 305-mΩ HS + LS (at VM = 5 V, 25°C)\n? Wide Power Supply Voltage Range: 2.5 V to 10.8 V\n? Dynamic tBLANK and Mixed Decay Modes for Smooth Microstepping\n? PWM Winding Current Regulation and Limiting\n? Thermally Enhanced Surface-Mount Package;

The DRV8834 provides a flexible motor driver solution for toys, printers, cameras, and other mechatronic applications. The device has two H-bridge drivers, and is intended to drive a bipolar stepper motor or two DC motors.\n\nThe output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current.\n\nWith proper PCB design, each H-bridge of the DRV8834 can driving up to 1.5-A RMS (or DC) continuously, at 25°C with a VM supply of 5 V. The device can support peak currents of up to 2.2 A per bridge. Current capability is reduced slightly at lower VM voltages.\n\nInternal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, undervoltage lockout and overtemperature. A low-power sleep mode is also provided.\n\nThe DRV8834 is packaged in a 24-pin HTSSOP or VQFN package with PowerPAD? (Eco-friendly: RoHS & no Sb/Br).

DRV8834

DUAL BRIDGE STEPPER OR DC MOTOR DRIVER

DRV8834_15

DRV8834 Dual-Bridge Stepper or DC Motor Driver

DRV8834PWP

DUAL BRIDGE STEPPER OR DC MOTOR DRIVER

DRV8834PWPR

DUAL BRIDGE STEPPER OR DC MOTOR DRIVER

DRV8834RGER

DUAL BRIDGE STEPPER OR DC MOTOR DRIVER

DRV8834RGET

DUAL BRIDGE STEPPER OR DC MOTOR DRIVER

DRV8834PWP

Package：24-TSSOP（0.173"，4.40mm 寬）裸露焊盤；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 功能：驅動器 - 全集成，控制和功率級 類別：集成電路（IC） 電機驅動器，控制器 描述：IC MOTOR DRIVER BIPOLAR 24HTSSOP

DRV8834PWPR

Package：24-TSSOP（0.173"，4.40mm 寬）裸露焊盤；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 功能：驅動器 - 全集成，控制和功率級 類別：集成電路（IC） 電機驅動器，控制器 描述：IC MOTOR DRIVER BIPOLAR 24HTSSOP

DRV8834RGER

Package：24-VFQFN 裸露焊盤；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 功能：驅動器 - 全集成，控制和功率級 類別：集成電路（IC） 電機驅動器，控制器 描述：IC MTR DRV BIPLR 2.5-10.8V 24QFN