DLPC231ZEKQ1中文資料德州儀器數據手冊PDF規(guī)格書

1 Features

? Qualified for automotive applications

? AEC-Q100 qualified with the following results:

– Device temperature grade 2: –40°C to 105°C

ambient operating temperature

– Device HBM ESD Classification Level 2

– Device CDM ESD Classification Level C4B

? DMD display controller supporting:

– DLP553x-Q1 and DLP462x-Q1 automotive

interior display and exterior lighting chipsets

? Video processing

– Scales input image to Match DMD resolution

– Bezel adjustment up ±50 vertical image

position and ±10 horizontal reducing the need

for mechanical alignment (HUD)

– Support for pixel doubling or quadrupling to

allow low resolution video input

– Gamma correction

? Embedded processor with error correction (ECC)

– On-chip diagnostic and self-test capability

– System diagnostics including temperature

monitoring, device interface monitoring, and

photodiode monitoring

– Integrated Management of Smooth Dimming

– Configurable GPIO

? No external RAM required, internal SRAM for

image processing

? 600MHz SubLVDS DMD interface for low power

and emission

? Spread spectrum clocking for reduced EMI

? Video input interface

– Single OpenLDI (FPD-Link I) port up

to 110MHz

– 24-bit RGB parallel interface up to 110MHz

? Configurable host control interface

– Serial Peripheral Interface (SPI) 10MHz

– I2C (400kHz)

– Host IRQ signal to provide real-time feedback

for critical system errors

? Interface to TPS99000-Q1 system management

and illumination controller

2 Applications

? Wide field of view and augmented reality

head-up display (HUD)

? Digital cluster, navigation, and infotainment

windshield displays

? High resolution headlight

3 Description

The DLPC23x-Q1 digital micromirror display (DMD)

controller for automotive applications is used in

chipsets for interior applications such as HUD and

exterior application such as high resolution headlight.

The DLP5530-Q1 chipset includes a 0.55” DMD

and the DLP4621-Q1 chipset includes a 0.46

DMD. Both chipsets also include the TPS99000-Q1

System Management and Illumination controller. The

DLPC23x-Q1 integrates an embedded processor with

error code correction (SECDED ECC), enabling host

control and real-time feedback, on-chip diagnostics,

and system monitoring functions. On-chip SRAM is

included to remove the need for external DRAM.

Combined with the TPS99000-Q1, the DLPC23x-

Q1 supports high dynamic range dimming of over

5000:1 for HUD applications. SubLVDS 600MHz

DMD interface allows high DMD refresh rates to

generate seamless and brilliant digital images, while

simultaneously reducing radiated emissions.

To aid in the design and manufacture of automotive

qualified projectors based on DLP technology,

there are a number of established optical module

manufacturers and design houses that can be

leveraged to support your design.