BUF20800

具有兩個可編程 VCOM 通道的 18 通道伽馬電壓發生器; ? 18-CHANNEL GAMMA CORRECTION\n? 2-CHANNEL PROGRAMMABLE VCOM: 100mA IOUT\n? 10-BIT RESOLUTION\n? RAIL-TO-RAIL OUTPUT\n? LOW SUPPLY CURRENT: 900μA/ch\n? SUPPLY VOLTAGE: 7V to 18V\n? DIGITAL SUPPLY: 2.0V to 5.5V\n? INDUSTRY-STANDARD, TWO-WIRE INTERFACE: 3.4MHz High-Speed Mode\n? HIGH ESD RATING: 4kV HBM, 1kV CDM, 200V MM\n? DEMO BOARD AND SOFTWARE AVAILABLE\n? APPLICATIONS \n? REPLACES RESISTOR-BASED GAMMA SOLUTIONS\n? TFT-LCD REFERENCE DRIVERS\n? DYNAMIC GAMMA CONTROL\n \n PowerPAD is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.;

The BUF20800 is a programmable voltage reference generator designed for gamma correction in TFT-LCD panels. It provides 18 programmable outputs for gamma correction and two channels for VCOM adjustment, each with 10-bit resolution. This programmability replaces the traditional, timeconsuming process of changing resistor values to optimize the various gamma voltages and allows designers to determine the correct gamma voltages for a panel very quickly. Required changes can also be easily implemented without hardware changes.\n\n The BUF20800 uses TI?s latest, small-geometry analog CMOS process, which makes it a very competitive choice for full production, not just evaluation.\n\n Programming of each output occurs through an industry-standard, two-wire serial interface. Unlike existing programmable buffers, the BUF20800 offers a high-speed mode that allows clock speeds up to 3.4MHz.\n\n For lower channel count, please contact your local sales or marketing representative.\n\n The BUF20800 is available in an HTSSOP-38 PowerPAD? package. It is specified from ?40°C to +85°C.

BUF20800

18-Channel GAMMA VOLTAGE GENERATOR with Two Programmable VCOM Channels

BUF20800

Programmable Gamma-Voltage Generator with Integrated Two-Bank Memory and External EEPROM

BUF20800

Programmable Gamma-Voltage Generator and High Slew Rate VCOM

BUF20800

Programmable Gamma-Voltage Generator and High Slew Rate VCOM with Integrated Two-Bank Memory

BUF20800

Programmable Gamma-Voltage Generator

BUF20800-Q1

具有兩條可編程 VCOM 通道的汽車類 18 通道伽馬電壓發生器; ? 符合汽車類應用的 應用\n? 具有符合 AEC-Q100 標準的下列特性： \n? 器件溫度 1 級\n? 器件 HBM ESD 分類等級 2\n? 器件 CDM ESD 分類等級 C4\n \n? 低電源電流：900μA/通道 \n? 模擬電源電壓：7V 至 18V \n? 數字電源電壓：2V 至 5.5V \n? 18 通道伽馬校正 \n? 2 通道可編程 VCOM：50mA IOUT \n? 10 位分辨率 \n? 軌至軌輸出 \n? I2C 接口 \n? 3.4MHz 高速模式\n \n? 提供演示板和軟件;

BUF20800-Q1 是一款可編程電壓基準發生器，專為 TFT-LCD 面板中的伽馬校正而設計。它提供 18 個用于伽馬校正的可編程輸出和 2 個用于 VCOM 調節的通道（每個具有 10 位分辨率）。\n\n所有通道都可以使用支持高速數據傳輸（高達 3.4MHz）的 I2C 接口進行編程。該可編程性替代了傳統的更改電阻器值以優化各種伽馬電壓的耗時過程，使設計人員能夠很快地為面板確定正確的伽馬電壓。無需硬件更改即可輕松實現所需的更改。\n\nBUF20800-Q1 使用 TI 的最新小幾何尺寸模擬 CMOS 工藝，從而使其成為適用于大批量生產（而不僅僅是評估）的極具競爭力的選擇。\n\n如需更低的通道數，請聯系您的當?shù)劁N售或營銷代表。\n\nBUF20800-Q1 采用具有PowerPAD?的 HTSSOP-38 封裝。其額定溫度范圍為 ?40°C 至 +105°C。

BUF20800AIDCPR

BUF20800AIDCPR TI (TI) 視頻放大器

BUF20800AIDCPR

18-Channel GAMMA VOLTAGE GENERATOR with Two Programmable VCOM Channels

BUF20800ATDCPRQ1

18-CHANNEL GAMMA VOLTAGE GENERATOR WITH TWO PROGRAMMABLE VCOM CHANNELS