ADLT2852MPS-CSL中文資料亞德諾數(shù)據(jù)手冊(cè)PDF規(guī)格書

GENERAL DESCRIPTION

The ADLT2852S-CSL is a low power, 20 Mbps RS485/RS422

transceiver operating on a 3.3 V supply. The receiver has a fail-safe

feature that guarantees a high output state under conditions of

floating or shorted inputs.

The driver maintains a high output impedance over the entire common-

mode range when disabled or when the supply is removed.

Excessive power dissipation caused by bus contention or a fault is

prevented by current limiting all outputs and by thermal shutdown.

Enhanced electrostatic discharge (ESD) protection allows this device

to withstand up to ±15 kV human body model (HBM) on the

transceiver interface pins without latch-up or damage.

The ADLT2852S-CSL is specified over the ?55°C to +125°C temperature

range. Additional application and technical information can

be found in the Commercial Space Products Program brochure and

the LTC2852 data sheet.

FEATURES

? 3.3 V supply voltage

? 20 Mbps maximum data rate

? No damage or latch-up up to ±15 kV HBM

? Guaranteed fail-safe receiver operation over the entire commonmode

range

? Current-limited drivers and thermal shutdown

? Power-up and power-down glitch free driver outputs

? Low operating current: 370 μA typical in receive mode

? Compatible with TIA/EIA-485-A specifications

? Available in 14-lead SOIC_N package

COMMERCIAL SPACE FEATURES

? Supports aerospace applications

? Wafer diffusion lot traceability

? Radiation lot acceptance testing: TID

? Radiation benchmark

? Single event latch-up

APPLICATIONS

? Low Earth orbit (LEO) space payloads

? Low power RS485/RS422 transceiver

? Level translator

? Backplane transceiver