ADC0804-N

具有 1 LSB INL 的 8 位單通道 μP 兼容型模數(shù)轉換器; ? Compatible With 8080-μP Derivatives – No Interfacing Logic Needed – Access Time 135 ns\n? Easy Interface to All Microprocessors, or Operates as a Stand-Alone Deivce\n? Differential Analog Voltage Inputs\n? Logic Inputs and Outputs Meet Both MOS and TTL Voltage-Level Specifications\n? Works With 2.5-V (LM336) Voltage Reference\n? On-Chip Clock Generator\n? 0-V to 5-V Analog Input Voltage Range With Single 5-V Supply\n? No Zero Adjust Required\n? 0.3-Inch Standard Width 20-Pin DIP Package\n? 20-Pin Molded Chip Carrier or Small Outline Package\n? Operates Ratiometrically or With 5 VDC, 2.5 VDC, or Analog Span Adjusted Voltage Reference\n? Key Specifications \n? Resolution: 8 Bits\n? Total Error: ±1/4 LSB, ±1/2 LSB and ±1 LSB\n? Conversion Time: 100 μs;

The ADC0801, ADC0802, ADC0803, ADC0804, and ADC0805 devices are CMOS 8-bit successive approximation converters (ADC) that use a differential potentiometric ladder – similar to the 256R products. These converters are designed to allow operation with the NSC800 and INS8080A derivative control bus with Tri-state output latches directly driving the data bus. These ADCs appear like memory locations or I/O ports to the microprocessor and no interfacing logic is needed.\n\nDifferential analog voltage inputs allow increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.

ADC0804-N

CMOS 8-bit successive approximation A/D converters that use a differential potentiometric ladder

ADE0804

SwitchesCoreProgram

ADE0804

DIPSwitches,ExtendedActuator,AutoInsertable,ThroughHoleandSurfaceMount

ADF0804

SwitchesCoreProgram

ADP0804

DIPSWITCHASSEMBLYADP/PASERIES

ADPA0804

DIPSWITCHASSEMBLYADP/PASERIES

AHSC-0804S

10/100BaseTSinglePortLANFilterModule

ASPI0804T

Specialdesignleadwireforhighisolation

ASPI-0804T

SURFACE-MOUNTPOWERINDUCTORS