A1121LLHLT-T傳感器變送器的磁性傳感器-開關（固態）規格書PDF中文資料

A1121LLHLT-T屬于傳感器變送器的磁性傳感器-開關（固態）。由Allegro MicroSystems制造生產的A1121LLHLT-T磁性傳感器 - 開關（固態）該系列產品使用固態技術來檢測是否存在超過某個特定幅度和/或標示的磁場，并提供指示是否存在此類磁場的雙態輸出。它們與磁簧開關以及線性或羅盤型固態器件不同，前者通過使用移動機械部件來提供類似的功能，后者提供指示所施加磁場的強度和/或方向的可變輸出。

DESCRIPTION

The A1120, A1121, A1122, A1123, and A1125 Hall-effect unipolar switches are extremely temperature-stable and stress-resistant sensor ICs, especially suited for operation over extended temperature ranges to 150°C. Superior high temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Each device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short-circuit protected open-drain output to sink up to 25 mA.

An on-board regulator permits operation with supply voltages of 3 to 24 V. The advantage of operating down to 3 V is that the device can be used in 3 V applications or with additional external resistance in series with the supply pin for greater protection against high-voltage transient events.

FEATURES AND BENEFITS

? AEC-Q100 automotive qualified

? Unipolar switchpoints

? Resistant to physical stress

? Superior temperature stability

? Output short-circuit protection

? Operation from unregulated supply

? Reverse-battery protection

? Solid-state reliability

? Small package sizes